I just happen to reading okuma posts and I saw your post.
I saw in your comand line that you were using a M42 at S350.
I seem to remember that when a M42 is listed, the machine will
lock your...
Type: Posts; User: RoundieLand
I just happen to reading okuma posts and I saw your post.
I saw in your comand line that you were using a M42 at S350.
I seem to remember that when a M42 is listed, the machine will
lock your...
Thanks for the info.
Called tele # on website and they faxed me a print on the head stock.
Talked to a fellow named Charlie Ext#136.
...
Hi, Roundie here
I know this sounds simple, but check the center line of your thread tool.
I'm thinking that you have your tool upside down to make your lefthand
threads. Sometimes this makes it...
Hi, Roundie here.
It's been awhile since I,ve checked out the site, But now I could use some
help.
I bought a 1630 Victor Lathe, about 1975 vintage I belive.
Every thing works but spindle...
What is the correct way to tension drive belts on BMC-20 Hurco mill?
Any help would be great.
...
Thanks For the help Superman.
If I find the promblem I'll post a new thread and try to explain what was causing
the Alarm error.
Thanks again, Roundie
Hey Superman, RoundieLand here.
Pulled top off of tank to find only a filter.
Could oil level sensor be located in the headstock?
Again, Any info would help.
...
Thanks for the info Superman,
I'll pull the top of the Tank off and check it out.
I'll let you know the results
RoundieLand
Hi, and welcome
There is no magic potion when it comes to finding work for a machine shop.
What it takes is lots of phone calls, good notes, and follow up calls.
Check the local yellow pages for...
Hi fellow CNCzone members.
First real post made since joining so lets get to the problem.
I have a MC-3va okuma milling machine with a "143 Alarm A Attached
unit error 1" . I was told that this...