I thought I would also mention that for some reason I have fairly high line voltage. I normally see far more than the normal 240v upwards to 260v at times. looking at the specs on the MeanWell power...
Type: Posts; User: Mike Hall
I thought I would also mention that for some reason I have fairly high line voltage. I normally see far more than the normal 240v upwards to 260v at times. looking at the specs on the MeanWell power...
I do not use my Epilog as much but this time of year I use it a lot. I was doing some engraving and heard a pop but the machine kept on operating so I was not sure what happened. A few hours later...
Perfect, this is the route I will be taking then. Thanks again...
I had stepped away from this machine for a while and just came back to mess with it and sort out the bugs. I left a machine that was operational with some hiccups and came back to a machine that...
Just an update with a question as well. I have been running the machine more and have run into some Servo drive errors with the Y axis motors when the gantry is moved back to the far side of the...
I seem to have solved the majority of the issue by getting the belt tension closer to what I assume is correct. The issue is still there when it is moving at rapid acceleration on the back side but...
Here is another video where you can here the harmonics... This is the servo drives making this noise and like I said it can get wildly loud if you take the gantry back any father. No clue what...
I have been refurbishing this Omnibeam laser I picked up and all was going well until this afternoon. I was leveling the bed and while moving the gantry to the far side of the cutting area all of...
I pulled a late one and got the new power supply and E stop contacts mounted and everything wired up. I ran the machine for a bit seeing if I could produce some very high amp draw and the highest amp...
Well I have no idea how I did not come across this before. It look like the IPC-5 power supply from Teknic would support my Servo drive setup and it is only a 350 watt power supply. That being said...
I am curious, what happens if you input 240v 3phase into a transformer that is designed for 400v 3phase? Would the output just be less or would it not have any output at all? There are so many 400v...
Ok I will give that a try. I may have an old 60watt bulb in the shop somewhere.
I have made an aluminum bracket to mount these units to but man they are bigger than I was thinking. I really needs...
I just got home from picking up these Linmot power supplies and they are just barely going to fit with a custom bracket I will make. It will be tight but it will work. One question though, these are...
I figured this would be the case but I wanted someone with more knowledge to make that clear. There is a lot to consider when dealing with these drives and motors but my whole logic is 600va...
Yes those Linmot units are but I found some local that I could pick up pennies on the $. The thing I would like to understand is how 600va is able to supply 4 Tiknic servo motors the power they need...
While reading up on this apparently with a machine like this which is high speed and accelerates and decelerates often there may be regeneration of up to 95v being sent back to the power supply. It...
I have considered using only single phase but I wonder if pulling a load off only the single phase lines would effect the voltage to the 3ph DC power supply for the laser itself. The servo drive...
I am not seeking to improve on the machine performance just simply want to replace the damaged 3ph toroidal transformer power supply with a more available off the shelf unit of some kind. The...
I thought I had already posted a thread but I guess not or maybe it was removed for some reason? Anyhow I have a Omnibeam laser machine that uses Teknic servo drives and motors. The Power supply unit...
Trying to make room for another project. I am going to lower this price on this system to $8500. I am not sure if you know anything about these lasers but if your tired of the crappy Chinese glass...
Not sure if this is even allowed but i figured maybe someone here may have some interest in this unit. If your viewing this with any interest chances are you are familiar with the Coherent K series...
Kurt, the jealousy is hard to fight off. haha
Guess what came in today!!! I am kind of impressed with FedEx. My package left China Tuesday and arrived at my house this morning early.
I love...
Kurt, Any updates? I got word and tracking info on my motors/drivers which according to FedEx will be here tomorrow. I have not been working on any drawings or anything lately as I have had other...
Michael, Where are you located? I am in the same boat as you as far as machining my castings for such as the oil grooves and ball screw mounting locations. My mill is up and running manually but I am...
I need to find a dumpster like the one your digging around it. haha
Looking good as usual. I heard back from Jinting on the motors but, it was last night about 3am. I hope I can get a deal worked...
I think the appeal to the mach software is everyone uses it and there is a lot of info out there to be found. I have no problem using a lesser known/used software as long as it meets the needs of the...
Is Chai going to replace it for you? I can go ahead and order the ball screws if he wants an order to send the nut over with. Let me know and we can work out the details.
I could bring my Miller Dynasty 200 Tig up and let you lay some dimes but, I am sure you want that finished before I make it up there. Those are some nice joints for tig welding, almost wouldn't even...
Looking great Kurt, I do not know if i have seen a thread where anyone gets there machine put together and then moments later is cutting parts on it. You must have had the control system totally...
I am almost positive I can utilize your ball nut mounts for all the axis for sure but I am going to mount the bearings on the outside to try to get every inch of possible travel i can. I saw this...