Hi
is it possible to change the PP for mach3 ATC mm, so at the end of the program it will
change tool to the First tool used in the G-code
example:
%
N60 G53 Z0
N70 G40 G49 G80
N80 G54 G17
Type: Posts; User: mikeDK
Hi
is it possible to change the PP for mach3 ATC mm, so at the end of the program it will
change tool to the First tool used in the G-code
example:
%
N60 G53 Z0
N70 G40 G49 G80
N80 G54 G17
Serum yes on my ATC spindle it blows air out through the bearing to keep it clean.
when i got the machine it was blowing all the time, I change it so it's only blowing when the spindle is running....
Frankmail - yes M50/51 are in the ladder too. the manual page you have to translate the page to english and in the bottom of the page it ask if want to read the rest of the document.
you can make a...
I got an email from Graham who ask me to write a little about how I change the ladder file on Syntec controller.
for starters, you need to install MLCEdit to change the ladder, once installed you...
I don't see any difference in your list compare to mine. maybe you need to change the macro or upgrade software on your controller :)
I was thinking, can you post your parameter list, I would like to see why you don't have ATC Set menu.
Here is a link to how G991T works, but you still don't have the ATC Set menu :(
...
did you try the G991T(tool no) ?
That is so easy, go to ATC Set menu, put in password, press ATC Set password, put in password again, press MPG button, now you can move the cursor to the tool no. you want to set. use MPG to move...
success :) :) I manage to change the Ladder file, so now my Air blow button works with M8 / M9 command. Now I just have to find out to do the F1 - F5 buttons.
/Mike
there is many ways to do this, it all depending of what you are using the machine for. You simple need to find out what works for you the easiest way. :)
I think the problem people have is they not...
Hi Daniel
I don't use spoiler board on mine. Do you always have the spoiler board on or is it on/off ? If you have it on permant I would referenc on the spoilerboard, and do a re reference when...
Hi R
Happy to help! :-)
/Mike
found out the M98/M99 Problem. :-)
Now again... Tool set. had problems like so many others in here an tried a few things, here is what I came up with.
1. Go to ATC Set. Set "The distance to the...
Hey
trying to do sub-programing M98/M99 on my 6MB controller but can't get it to work, did any one have this working.
/Mike
maybe It's not possible but Mach3 has this feature, It is used when you got 2 motors on your gantry where one of them is running slave to the other motor, when you refend the machine
the two motors...
Hi
Back to Auto squaring issue. Did anyone make this work on a Syntec 6MB, I know it is not possible on a 6MA because it only have 3 axis, but the 6MB have 4 axis
and should be able to do auto...
Jeff
can I ask if you want to share the .NC PP with me
Mike
Hi
Aspire have the Syntec PP on it's list.
360556
/Mike
Okay, but the one I have here it's 8mm head, I think it's easier to get your tool in to tightening the bolts with a 8mm spanner instead of 10mm. spanner
No news yet about the tool holder... I...
I can see I have a different turret than yours, my is the new model, but the Clamping gib is the same, I have 2 of those. If you send me the DXF of the clamp I will put in the right measure. It is...
I have now tryed to contact CNC_SWE on PM bud no response, I can see that he have made the tool holder for his EMCO 120. Is he still around on this forum ? or if CNC_SWE read this please contact me.
Hi Bad_G
Thanks for the drawing, i need that too. I also need drawings of the clamp.
Like I said, there is nothing left only the turret, all tools and holders was removed.
/Mike
I forgot ! all loves pictures so here are one of my new machine :)
http://i.dbastatic.dk/images/3/79//85322579_18082012163504_3510_3.jpg
Hi All Emco 120 owners
I just bought a EMCO compact 6, my problem is that it came with out tool holders, and I can't finde a dealer that sells them.
any one know where to bye them ? Item no....