figured it out...Linear tracking tool drum was selected.
Type: Posts; User: coop31
figured it out...Linear tracking tool drum was selected.
Hey guys,
My tool changer on my older Arrow 750 with a2100 control is acting up. The air cylinder pushes the tool changer to the spindle, but as soon as it gets there the air pressure is shut off...
Hey, I had a very similar problem a few weeks ago.
Machine was running perfectly fine, then all of a sudden I heard the spindle stop. I looked over and the computer was shutting down, When I tried...
I had a similar issue. I resolved it by bypassing the timer, Attach these 2 black wire together.
473242.
A couple of my arrows have like no program storage...option was not purchased so i think its like 150k of program storage.
It's not a problem though because you don't need it if you can figure out...
Sent to your email. Let me know if you got it.
PM me your email address and I'll send you the pdf
I would love to have some spare boards.
if you can ship it to canada I'll cover the shipping cost.
Can anyone help me out with the bios settings for real time board 3-424-2171A01
I've got all the equipment needed to do this.
does your machine have a network adapter installed? much easier that way.
I would also say phase issue. I had the same problem. Spindle running correct is not dependent on phase.
As Mav said, you might run into problems with the hard drive turning on a off. I would disconnect the hard drive to eliminate any chance of corrupting it.
i Have a 1250c with simodrive 611. My machine is 400 volt.
Hey guys...
I'm trying to edit a post that Ive downloaded and I don't really have a clue.
Its outputting inverse time feed rates and that's fine, but my machine doesn't like the numbers it...
I purchased 3 seats of version 26 mill3x pro for like $1000
Called and asked about the new version with 4 axis and was told it was $6400 for one seat. Is that crazy or perfectly normal?
playing with the demo and i closed my cam tree. How do you get it back?
Thanks for the help today Greg!
I have a2100 control with 4th axis ready from factory. I bought a Cincinnati Milacron Sabre labeled NC-10-B 4th axis. It hooked right up to the machine with no alterations.
4th axis seems to...
Can anyone confirm that their 4th axis can do full 4 axis simultaneous machining. Mine does not. seems it will only position,then 3 axis.
More..System Config..Machine Application..Cycle Control... uncheck "MAI End Of Program Enable"
You didn't dig quite deep enough...Lol
SUCCESS...
There is a setting that needed to be changed...
Very Interesting Maver1ck.. I assumed it had something to do with the software as my other machines don't do this.
PROBLEM SOLVED...
Thank you so much for leading me down the right path to finding the problem. I have no idea how this happened, but one of the wires on the e stop came loose. What a relief. I was...
I don't think I have the optional M codes.
Might be easier to pop a hard drive from another machine in there or is it part of the MAI?
Thanks for the info Mav. Sorry for taking so long to respond... Since this post I have moved everything into a proper shop and it has taken some time.
I have messed with this machine again in the...
Well that sucks...lol
Found a suitable replacement. " Lovejoy GS 24 Spider 98A Red"
Hey guys... On my newest arrow 750 (A2100) I have to open and close the door after a program runs in order to run the next program. It's driving me crazy... It's my only arrow (I have 5 now) that...
I called Lissa in Canada a week ago and still no answer. Someone at your place called me and was looking into it for me yesterday. Hoping to hear back soon.