the helical cut is present :-)
Type: Posts; User: maxlopez
the helical cut is present :-)
I have to try if it performs the 3-axis arc movement, it's exactly as you say.., thanks
not have dnc..
have "tape storage 320m"
"one part program capacity 160m"
"additional axis A"
hi, does anyone use cadcam for this old mill? thanks
thank you all for the precious advice, for the moment I'm using a cadcan on the computer, I think that as superman said it is the best choice, so I learn to draw and I can create code for any...
hi, someone uses bobcad for an okuma mc4va milling machine with the 4 axis, I didn't see the post on the website for the osp5020m processor, maybe it's already included with the software...
which is the best cadcam? for the old okumas such as the osp5000 lathe, type lb12 lb15, and mc4vae machining center with fourth axis, which has "fixed cycles", as we know these machines do not have...
hello i have mc4vae with osp 5020, do you need help ?
hello, as I wrote at the beginning of the post, I swapped the upper board with Z axis, the result was that the Z axis didn't work and the A axis worked, so the fault is in the upper board,
do any of you have the pdf of this superior electronic card? thanks in advance
Hi can you tell me which one is it? Thanks in advance
hi, okuma mc 4 va osp 5020, after repairing the power supply, of the upper board of the E4809-770-015-D SVC drive, I mounted it, the green led is on, no red led or alarm is present, but the axis (A)...
for okuma mill 5020 mc4va
does anyone have the pdf? thansk
Thanks a lot????????
cncmanual.com/okuma-osp5020m-osp500m-g-operation-manual/
page 313 or near them .., I think maybe you are looking for this?
can you help me to record the tool length and the zero set? thank youuuu
hi, I bought an old mc4va, could you help me to start mc4va tool length and zero set, thanks for your help, it would be very convenient for someone to make me a video ...., I have inserted the tools...
https://www.cnczone.com/forums/okuma/133925-okuma-osp-floppy-simulator-3.html
downloaded the latest zip file
cioa kurmay, where can I find this card? do you have a code? thanks
I finally solved it by changing the parameters and inserting in the program the sign of:%
Optional Parameter Bit #1 - 0000 1011
1.0 (Auto parity check: yes) 1 my is 1
1.1 (ISO code:...
here are the parameters, thanks
thanks kurmay, my cable is the same as the pdf "RS232C_Setup", the number 1 was missing in db9 and i added it, but it doesn't work, i should build myself another cable like pdf "okuma osp5000".
i...
I've tried both ways, but it doesn't work, thanks :-)
I am attaching the photo again, I forgot to write 4 and 5 in db25, this morning I try as you say guntisk, but from many internet connections my cable lacks connect pin 1 of db9 to short circuit 4-6,...
I managed to copy the files from the mc4vae floppy drive, I had non-working floppy disks, or changed the floppy disks and now it works,
while the connection through the 232 cable still does not...
can't transfer the program from PC to mc4va, can you help me????? ,
in photo n2, I also tried from floppy 3.5. but I did not succeed..
from the cnc to the pc it works
cncmanual.com/okuma-mc-4va-vmc-osp5000m-g-parts-book/
hello, do you have the precise name of this card? is it okuma? thankss
thanks :-)
I bought this 3.5 okuma floppy, I did another test with this electronic board, even changing the original 34 pin cable (short in the picture) with the crossover computer cable?the outcome was...