Search:

RattMotor 0.8KW 220v 400hz 5A Water Cooled
https://www.ebay.co.uk/itm/265780690074

Hi I finally received my new spindle used the settings above it seams to be working fine
you mentioned that there is more settings to set i dont want to run it again until im sure its all good...

What i meant was i just bought another Chinese spindle same spec from a seller in Germany as i can not find any in uk for the right price instead of waiting to get one directly from china it will...

Someone strongly recommended to change it to CNLINKO Something like this https://www.amazon.co.uk/dp/B0B2WMBWK4?psc=1&ref=ppx_yo2ov_dt_b_product_details

this spindle came from china i will...

I removed the plug to make sure it was not the plug that had the problem i was going to replace the plug to a better one

i removed the plug just to remove any plug problems i have red blue and yellow and earth

Yellow to Red = 0.98Ohm
Red to Blue = 1.50 Ohm
Blue to Yellow = 2.25 Ohm

My Spindle is water cooled

is there a way of testing spindle to find out if i have a bad spindle

i tried those parameters i see the spindle twitching ang get same error

thank you for your...

by what i found its 3000rpm per 50hz 400hz/50hz = 8 x 3000 = 24000rpm

P212 = 3000
P213 = 2
P215 = 400

Thank you i dont know what to do i feel like giving up on the hobby all together.

who is Matec?

i even got a cheap second vfd to test is doing exactly the same im sure there is some settings i am missing i have been on this for days now im pulling my hair out

i have set it all before i attempted to run the motor

yes it is a 400hz 24000rpm i have set P105 and P110 to 400

Just got a NZ100 VFD and a 0.8kw water cooled spindle for the past week been trying to set it up with no luck
keeps giving an error of over current i attach a video and VFD Manual