The toolpath you are seeing represents the center of the tool at the tip. As the tool comes up to the intersection of the two surfaces it is maintaining contact with the radius of the tool as it...
Type: Posts; User: Alex_Cole
The toolpath you are seeing represents the center of the tool at the tip. As the tool comes up to the intersection of the two surfaces it is maintaining contact with the radius of the tool as it...
I have built several cnc machines over the years and have used geckos along with other drives...I have always ended up replacing other brand drives with gecko products. Currently I have a 4 axis...
Currently the taper tool, T-cutter, dove mill, and lollipop tools are available in the profile path in BobCAM V3. They have not made it into the BobCAD product yet.
Hth
Sent from my LGL45C...
On the CutSim tab in the simulation there is an accuracy slider. Move this over to high and you will see the graphics will show better. To see that it is not in fact clipping the part you can...
Maybe the new video driver is causing the issue?
Were you having this issue before the update two days ago?
Hth
Ac
Sent from my VS920 4G using Tapatalk 2
If you have modified a machine or post I believe the uninstaller wont delete it..I would have to double check that. When you re-install the installer will not replace any files that are newer than...
That erroe means your collision checking in your machine setup is bad...this usually means the machine is not confugured correctly.
Hth
Ac
Sent from my VS920 4G using Tapatalk 2
As stated by Al in his 1st paragraph. The 5 axis paths have options to be output in 4 or even 3 axis mode. So all the new paths for 5 axis can benefit a 3 axis user. His examples are showing how...
Also keep in mind that if you are in part\current settings it is best practice to close the dialog(data gets written) before you change to a different machine. If you change to a different machine...
Are you checking the box in Defaults\Current Settings or Part\Current Settings?
If you set in default..then it will not automatically update your current parts settings unless you pick a...
The rapid moves are not displayed on screen because the order the parts get cut in is based on the Cam Part\Milling Tools\Part\Machining Order dialog settings.
There is an easy way to determine...
What post processor are you using? Can you post it up here. It looks like your post is missing the variable "feed_mode" in some of your positioning blocks.
Reference BC_4x_Mill.MillPst.
...
Please note that I am trying to provide helpful information that will assist with some of the issues you guys are having. Having said that I am human and can/may be prone to some blunders...please...
Next lets look at Q:441
This question is for setting the feedrate output mainly how it will affect output for rotary axes. Lets look at the reason 1st.
If you want to move 3 linear axes at...
Burr, Lets see if we can get you fixed up.
1. The post where the rotary_angle variable is from the initial release of the new update. If you modified that file in any way the the installer...
Your old post processor should work fine in the new software. Here are a few things to check.
1. Make sure in Cam Part\Milling Tools\Part\Current Settings\Multiaxis Posting that you have the...
No problem. Just glad we can help you out.
AC
There is a HaasVF.MillPst post that gets installed. The posts that are new and go with the new machines are the BC_ machines and posts. I will post more in a bit when I pull out my laptop.
AC
...
Make sure on your Milling Tools\Part\Current Settings\Multi-Axis Posting page you have the "Machine Definition Zero" set to "Real Machine Zero" if you are using the "Work Offsets" XYZ values to...
where do you have your machine setup origin located?
Sent from my VS920 4G using Tapatalk 2
No problem, Glad I could help!
Build 769 uses the machine you have selected where the older versions did not.
Make sure under Cam Part-Milling Tools-Part-Current Settings you have a Milling machine selected.
If those are...
For those that are interested:
It appears with some quick testing that the variable "tool_name" currently is working for 32 bit systems but not outputting on 64 bit systems. I just tested...
The default installed HaasVF.MillPst file uses the following tool comment output code
"(TOOL #",list_tool_number," ", tool_diameter, " ", tool_name, ")"
If you are wanting the "Tool Label"...
The output format you have above does not match the default output from the HaasVF.MillPst post processor. I assume you have a modified post processor you are using for your testing.
If you...
The lowercase P issue should be handled in the new 769 update.
AC
Check your positive high setting for step and direction. If I recall this is what was at fault.
Sent from my Droid
Well I got the machines moved into there new locations and have even made some parts. The mill and lathe both seem to have made the move ok.
I really need to get a coolant pump setup for the...
I am going to replace the switches because the ones that are on the machine run in a Normal Open configuration. That means the 5v only makes contact if the contacts touch.
I want to run mine...
I have not posted in a while and I am sorry for that. I recently moved my family to Florida and have been busy. My machine tools are currently in storage but planning on getting them down here in...