Search:

Thanks John for your response.
Over this weekend I found the PDF for the LX3 Which has the same image you sent (thanks). This morning I fixed or found a way around the issue. I repined CN6 Honda...

Yes, I removed the machine's socket from the panel and checked with a meter that there was contact from cable plug to back side of each pin.

The machine settings appear to be correct I tried...

I have a 1991 HT20SII with the Yasnac LX3 seikos multi control
It had been receiving NC programs via RS232 port but yesterday it will only send the program and no longer receives. I tested the cable...