Search:

Thank you again

I have been using your 2010 screen set for some time, almost from the begining. I have hesitated to ask but would like to know if there is a way to show the profile name being used on the screen....

Joakim,
I installed .NET Framework 1.1, 2, 3, 3.5 and then it worked Thanks for the point in the right direction.
Jim

http://www.microsoft.com/en-us/download/details.aspx?id=26 for 3.5 without...

I have a problem. first the joypad is working find but I am not able to run the joypadsetup.exe I get an error
Application failed to initialize properly (0xc0000135) press ok..........
I have run...

Gerry
That was going to be my next question. Do you do mind reading on the side? this is wonderful every thing is working. Now I have to change my vcarve pro pre-possesser back to the way it came....

Gerry,
Thank you
On line 'N002 S12000 M03'
I have to use M08 or M802 (a macro) to start my router. That is how I have it hooked up.
Say I could have another switch if I change that. I'll have to...

or Does anyone know of a good g code tutorial?

I can't find anyone that has had the problem I am having. I don't know if it is in Mach3 or the 2010 screen set. here is the problem.

The feed rate doesn't change on the machine when the file runs...

titaniumw41,
http://www.cnczone.com/forums/open_source_cnc_machine_designs/73670-2x3_free_router_plans_--23.html Post 373 - 375
This worked for me. I haven't had any problems.
Jim

Try again for pics. BTW I got the plastic at jo-ann fabric. It was the thickest flexable plastic they have and the rollers never get have to go through dust. Hope this works for you also.
Jim

Now for the rail problem. This has been working good for me.
Plastic, the length of the rail and it goes into the top slot and is held in place with packing tape. As for the length I made just long...

MArruda,
I have a 4x4 unit from fine line automation and had the same problem at first. I needed to clamp all the axis much tighter than I first thought. I started with the y and x when I did the z...

Nate
Jim C. from Michigan here can you call me about my last 2 shipments A.S.A.P
Thanks
Jim

Nate
Jim C. from Michigan here can you call me about my last 2 shipments A.S.A.P
Thanks
Jim