I not shure how to use this "extern volatile int ThreadActive"..i gues is a string like this 00000000..
Can you give an example how to check for Thread #2 and give a result in a Boolean true/false...
Type: Posts; User: swat cat
I not shure how to use this "extern volatile int ThreadActive"..i gues is a string like this 00000000..
Can you give an example how to check for Thread #2 and give a result in a Boolean true/false...
Yeah but i will fill the main Thread with that and never use it when is in cycle Run...
a least there is a way to read if a Thread is running or not? Some internal variables?
Sent from my...
Hi TOM, want to set the MPG pendant program outside de main Thread (1), meaning i need to run it just just when a binary input (ex. 66) is ON on Thread 4
So in the main program in need to run...
It works now.. how do you set as quadrature?
Sent from my SM-G7810 using Tapatalk
Yes. Measured on oscilloscope it was 2.5us.. i ve changed it476998
Sent from my SM-G7810 using Tapatalk
477000477002477004
I have dc4 drives.. works verry good at 180v.. you just need to instal a encoder to that motor.
Sent from my SM-G7810 using Tapatalk
Hello, i need to install a new Servo for the 4th axis. the Panasonic Servo drive needs 12 for the Step Dire, I`ve made the schematic below, it works but i can`t go over 300K Pulse per seconds..
...
Hello. I need to turn on some light indicator when the machine is Running a gcode ,
Feed hold; what variables should i check to Setbit()?
Sent from my SM-A705FN using Tapatalk
https://youtu.be/OU00dVVAZT8
A little...
I'm pretty sure every CNC controller will have in G95 mode the FRO active.
https://www.haascnc.com/service/codes-settings.type=gcode.machine=mill.value=G95.html
"G95 Feed per Revolution (Group 05)...
Thanks for the answer. G95 generaly it is used turn a part with constant chip thickness.( could be used for threading but you have g32). https://www.cnc.com/what-is-a-g95-gcode/
So g95 it's a...
I've installed version 3.35b. The same problem.
It's not ok.
https://m.youtube.com/watch?feature=youtu.be&v=GiAq29AssoM
Sent from my SM-A705FN using Tapatalk
this 4 are running until i make a version of them in one file
4.34, i've been waiting for the official version of 4.35.
In normal motion g0 ,g1 feed hold and motion halt works instatenous.
Tool setup is the same as in post #17
Sent from my SM-A705FN...
and Feed Hold not working, Program HALT stopping after Look Ahead time (2s)
https://www.youtube.com/watch?v=JEJsLjPr8E0
I have some problems with G95 feed per revolution
FRO it`s not changing the feed value
When i change SSO, Kmotion freezes or give a error.
...
Now i'm running all the threads for testing reasons. In the final version i will merge all of them in one file.
Yes. The program it's compiled and downloaded to thread 6.
I've imported open...
This is annoying.... why
https://youtu.be/sgjxYiK62vA
https://youtu.be/2VFsXJYXWlU
Sent from my SM-A705FN using Tapatalk
now i`m working for the external control . FRO SSO and Rapid OVR
i need to start the .c program manualy ( it`s running on thread 6). i don`t know why it`s doing that....
Yes. It works now. Why the CSS(rpm) measurement is double the specified S value?
Sent from my SM-A705FN using Tapatalk
i noticed if i press halt button, the spindle starts and if i jog x axis it changes the spindle speed. but it doesn`t show the RPM value like it nomally does. (looks like the double of the S value)....
https://youtu.be/9jNDA9i8vxI
1.I have an issue with spindle control on CSS mode.
In G97 the dac outputs the proportional value of the max rpm. In G96 it doesn't output voltage on DAC3
My...
Hi tom,
I need to solve some problems at this moment:
1. The tool path in the G viewer is inverted. I`ve tried to invert it by checking the box for " X positive Front" but with no effect.
2....
https://youtu.be/CAP2MLIThnU
Fist beta tests :)...
I start this discussion because there isn't any simple way to have a remote console for the Kflop without using many wires..
So a Konnect board would be a good solution, but the communication over...
https://youtu.be/yM9l3VmH5HI
A funny moment
The braking circuit failedhttps://uploads.tapatalk-cdn.com/20200204/87720dfd12035f5a2f8915edf1e5e673.jpg
Sent from my SM-A705FN using Tapatalk
ok. so i could use " 74HCT244 " https://www.tme.eu/Document/961c554e2f399759ceb381011e12929a/74HC_HCT244.pdf
It will be ok to convert 3.3v to 5v TTL for the step/dir signals from KFLOP at high...
Yes, the drivers are opto isolated. But i'm afraid if something were to happen to the driver, i don't want a high voltage to return to the 5v line to kfloop.
Sent from my SM-A705FN using Tapatalk
I've highjacked two channels from the kanalog to use them as Step/Dir and i used H11L1 optocouplers.but they are ttl (need internal 5v). Any suggestion for a open collector type optos with a high...