Search:

Hello everyone

I have a MIYANO TSV-35 with a Fanuc O-MC controller. There was a power surge in the workshop and the machine's parameters got all messed up.
So, I erased everything and...

If from tcv-35 are any help , pm me to send it to u

Sorry im kinda new in heidenhain. So in order to lose bad finish i need to work in lag mode 1390= 1 and changed 1810.1 ( y - axis) ?
Do i change 1510.1 to?

Yes Mp 1810.1 change reduced the shaking , but did not eliminate it completely . In comment section under parameters the value for 1810.0/1810.1/1810.2 were 2. When i tried to change em the value was...

As title said i have kind of vibration/shaking on y axis that ruin my finish surface. Controller is heidenhain 426 pb , machine is 3 axis vertical mill. From what i understand and read , i need to...

No it doesnt have a tape mode , its OM version A , and aloso it dont have dripfeed option in the ladder.It seems im stuck with 32k memory :S.

Also , does your OM version C does the work? are u...

No it doesnt have a tape mode , its OM version A , and aloso it dont have dripfeed option in the ladder.It seems im stuck with 32k memory :S.

Hi guys

Im thinking to buy cnc vertical mill 3 axis for machining moulds for plastic and ruber dies etc. My price range is about 20k euro. I have small mill , but its memory limited ( fanuc 0m )...

So i've found the alarms in maintenance book. Alarm 005 and 025 , under these alarms there is table sheet ( Problems which may occur on commissioning of the axes , the alarms used below prevent the...

I can jog the machine all day with no prob, but when working under program, i got random stops (sometimes it stops mid program sometimes it finishes whole ). My control is on Italian lang. so i got...

I read somewhere , your buffer getting overwhelmed due to lot of lines ( if im not mistaken your NC code is processed point by point , for instance only G01 , and no G02/03).Try lowering the feed so...

When i cycle my simple program and get to the block for instance T2M6 my O9003 macro calls up,it goes to all blocks until it get to the M6.Here my umbrella holder is spinin infinitely.Also i cant...

Your inbox is full :)

Yep it was the reciver chip.Thx mate, nice skills :O)

So i lost the parameters ,and didnt save the old ones duh :S. So i think i have a hard copy of them (the parameter copy is from fanuc om-c and have the model of the machine , but i have an manual...

Noup cant upload either . Any other ideas? Mb im missing something banal.
Also to summarize it i cant send from pc/cnc nor upload cnc/pc

Is it possible for some circuits to go faulty? Because everything was fine before this, i didnt change anything, if something is faulty do i get an alarm or?

I found this thread...

i tried to change the ports ( differend ports COM1 COM3 etc from PC settings) but no response .And yes my pc can upload to another machine ( using the same cable i uploaded to my agie edm machine no...

Well, sending programs worked perfectly fine, until today im not able to send any programs to the machine.When hit input key, there's lsk flashing, but the frogram wont upload to the machine.I also...

so By accident i hit the upper head into a working piece by manual. Machine is matra tape cut. So now when i try to move U or V axis i get the 433 and 443 alarm.Can i fix this ?
under those alarms...