Fanuc Oi-MB controller to clarify
Type: Posts; User: MXBONZ
Fanuc Oi-MB controller to clarify
Yep (shift)P and cancel all at the same time usually clears it. Usually. I have an x overtravel / emg that won't allow me to clear even when holding all 3 and powering up. There has to be an...
A bad H offset input caused a crash off the x axis. Luckily no steel to steel. Soft jaw damage and a carbide insert. Lucky there but EMG alarm continues to flash with no way to return. Tried...
Powering up the machine still has the carosel stopping at T1 after zero return as the carosel changes position the LED does not advance tool to tool It stays on T1.
The original alarm message was...
Sorry to not answer your first question completely Tim,
When it powers up after all clicks zero return the carosel rotates but the LED stays on T1. It rotates a full revolution and stopping at T1....
Thanks for the reply.
I've always waited for the 2 clicks so that isn't an issue.
The proximity sensor could be the culprit. I changed out the servo motor and gearbox myself with warranty...
had not used my SV2412S mill in 2 months ...warmed it up was running a program got to T6 (drill T7 Tap T8 Ball end mill.
After drilling with T6 the tool changer picked up T8 and began performing...