Hello Jerry- thank you for the post!
I create these region curves but If I create a z-level-finishing toolpath it makes only one step directly on the drawed surface.
I need 5 steps with 2mm...
Type: Posts; User: figurenholz
Hello Jerry- thank you for the post!
I create these region curves but If I create a z-level-finishing toolpath it makes only one step directly on the drawed surface.
I need 5 steps with 2mm...
Hello from Germany
I create a single 3D surface because this surface I have to mill from an existing part. Above this real existing part are some little things (10mm hight) that I must remove in...
Better pic
Okay.
I understand. 🙂
But what's to the side? The stepover is 50% but in the middle of a square is region that the bit don't cut.
Hello.
If the finishing distance is 0.3mm and Madcam roughing a pocket... Why madcam also dont cuts the middle of the pocket?
There also stand Material in 0.6mm... 0.3 from both sides.
I...
Hello
In the cutting directions in madCAM I can select 0°, 180°, -90°, 90°
389546
my machining software can´t work with negative values, lower as 0°.
Is there a possibility to make a 270°...
Hello. Today the first day my 4th axis is working exactly.
I had create indexed toolpathes from 4 sites with clipping planes in the middle of the part. From two of the 4 sites I go deepeer as the...
Hello Joakim,
Yes I had try this.
Now I think I use the ISO G-Code 4-Axis MadCAM PP
I had modify it at it works.
My simulation looks confusing but in reality it has worked at the first...
Hello.
since 3 weeks I would make parts on a 4-Axis machine. Now I think my problems comes from a postprocessor that not works to my Software (Beamicon2)
I had search a folder with all my...
Hello again.
Many thanks to Joakim from sweden. He shows me in a video what I must do to create the passes. The way I go to my passes was nearly the same but the mistake between madCam and my...
Okay, I activate OneDrive
Here is the link
https://1drv.ms/u/s!AsRGBxXm2wWHhgAT0KG5edRiVztR
Hello.
Thank you for the link
last week I search for a screen recorder and havent found a free version ;o)
Thank you
Hello Joakim and Mauri.
Today I get better results in simulation. I take indexed 4-Axis Mode and rotate the part 4 times in 90degrees steps. I also use clipping planes and the roughing result...
new findings
If I look the simulation in same direction as the A-Axis I see, that the Y-Axis dont make any movings and is still in the middle of my A-Axis. ...but If I look at the values at the...
Hey, madCam- whats wrong with your Support? There are holidays in sweden?
Its not a free software and a customer can hope of support. I´m totally pissed on!
I must produce my parts and I need a...
Here a Video I made to send it to madCAM Support
https://youtu.be/wQ40Z9NLV60
Hello Sven- DANKE!
Dein Deutsch ist Super!
Because the most peopeles here speak english, i olso try to answer in engllish.
Some words that I translate to german has much meanings and thats...
Oh.
No answer...
I must mill some of this parts.
😳
I will create my first 4-axis Code:confused:
but the Code dont uses a A-Axis
Here my Settings I use a A-axis in same direction as Axis X
385392
Here you can see other options I think I had...
Hello from Germany
It´s possible to use other languages in madCam?
My english is not the best and some designations I dont understand.
What is "stock to leave" If I translate stock to...
Okay ;o(
thank you for the fast answer :(
Hello.
Today I uses Madcam first time. I use a 4-Axis CNC (X,Y,Z,A) and I also cant see the stock in simation mode on Madcam. Because the last post is from feb/2017 I will ask you...
Is the stock...
Thank you,
I take two curves in regions and between this curves I had create 3D toolpathes ;o)
Ok, I found a way to get it...
Sorry for the tread.
Where I can delete it?
Hello.
I will mill a part from two sides. Because I dont have end mills that cuts the complete depth I will make 2D!!!! toolpathes from both sides. Also I create some tabs to hold the model. The...
Hello.
I think I sove the Problem but now I have a new question.
The tool should pull down with a ramp of 40 deg into the material. And I see that the feed madcam uses to make this ramp is...
Hello from Germany.
-Please use simple english to answer!-
Because I cant find good informations into the german Forum I try to get it here.
Normally I mill wood but to build a new CNC...
Hello. from Germany
Thank you for the comments.
Now I know that the cutting depth is fix and for cuttung a 1.5mm deep pocket I must use a cutting depth of 1.5 or 0.75 or 0,375...
I had think...
Hello from Germany
I will use Madcam to create toolpathes. I have a 10mm high item into a also 10mm high piece of material.
First I take the tool to cut out my item from the rest - that is OK...