328906
Here is a page from the manual. The encoder and hall signals are multiplexed.
Thanks in advance for any help
Type: Posts; User: medu2015
328906
Here is a page from the manual. The encoder and hall signals are multiplexed.
Thanks in advance for any help
PathPilot is a highly customized version of LinuxCNC and therefore has the same hardware requirements as LinucCNC. The LinuxCNC WIKI has a section on tested motherboards.
I would like to know if the Argon drive will work with a Sanyo Denki P50B08100DXS00 motor. The encoder uses multiplexed ABC and UVW signals.
Eldon_Joh
Thank you for your suggestions. I will add them to the list of possible changes to the design. There will be some time before the design is frozen as I will prototype the tool changer...
I have just completed the first cut of a new machine design. The base apron and head are to be epoxy granite and the vertical would be a 6 x 12 filled with epoxy granite. The cylinder on the back...
I experienced the same problem on my PC board router. The problem tuned out to be lost steps on rapid retract due to the mass of the Z axis. The problem was eliminated by slowing the rapid
Good Luck
I am retired now. My background is as an experimental machinist and design engineer. Up till now I have designed and built a CNC router and retrofitted a Bridgeport to CNC. My current project is...