No cutter comp used, center of the O-ring is the center of the cutter path.
Type: Posts; User: Geo55
No cutter comp used, center of the O-ring is the center of the cutter path.
The G154 P17 is a part location. It is one of the 100 or so additional part locations that Haas uses. G154 P17, G154 P18, G154 P19, G154 P20, G154 P21, G154 P22 and so on.
Sorry, when I say the exact same thing I mean My original Program.
Thanks guys, I'm rather new to this (Newbie) and not trying to get to confused. I agree to the ramping of the part instead of the plunge. I am using a 2.38 mm ball nose and the radius of the groove...
So I'm using a different part location for each of the 6 parts using say....G54 for one and G52 for the next G53 ....and so on. So if I can get it to run without an error in the first location I...
Making O-ring groves in different part locations G54-G59 and trying to loop that cut to get to my desired depths. So I thought that I could write a sub program to accomplish that and just give it a...
I do. But cannot delete it. I'm Sorry
Making O-ring groves in different part locations G54-G59 and trying to loop that cut to get to my desired depths. So I thought that I could write a sub program to accomplish that and just give it a...
Trying to loop a simple program, Is it possible to loop a program that isn't canned. Here is what I have:
%
O00001
TO1 M06
G90 G54 G00 X0 Y19.0
S3000 M03
G43 H01 Z1.0 M08
G01 Z-3. F1000.
G41...