Use the rotary toolpath.
https://www.cnczone.com/forums/attachment.php?attachmentid=441562&stc=1
Type: Posts; User: schneik
Use the rotary toolpath.
https://www.cnczone.com/forums/attachment.php?attachmentid=441562&stc=1
Looking for recommendations to buy local Al for prototype shop we are setting up. Want to by local.
cheers,
schneik
Is the chamfer modeled in the 3D part?
As a general rule:
If so you should use the 2D contour.
If there is no chamfer modeled but you want to add chamfers only in the CAM/Toolpaths, then use the...
line n760 is the tool change.
Line 740 is an optional stop.
If if you check you main tab on the pathpilot control I bet you will see you have m01 break button on (green).
So when your program...
As] of Thursday May 12, this issue has been fixed.
We have found an important issue and would like to get a warning out quickly to help avoid loss of data with your cloud tool libraries.
The team is working hard to correct the issue in a hotfix....
Under you user name in the upper right is the preferences menu.
You can change the value there. Go to units and value display and then set general precision to 4 places.
The controler looks to be from this line:
http://m.alibaba.com/product/60335474629/DBLS-08-H-high-voltage-with.html
OK So no sooner than posting this image.... UPS shows up with the backordered flood coolant kit. Inside is the coolant control kit that adds the receptacle that controls power to the coolant...
I have the same issue. I have attached the wire diagram to see if anyone has tips on where we would wire in the plug.
318548
Great, let us know how it goes once you post.