define the tool . then you should use 2.5 axes closed contour procedure .
you can pm me for more info
Type: Posts; User: doc0302
define the tool . then you should use 2.5 axes closed contour procedure .
you can pm me for more info
you are right it has a 25 pin serial connector at the machine , what cables to use ? , what software on the pc?
we have recently bought used agiecut classic s , whats the procedure to connect it to the pc , for file transfers to the machine . it has a what looks like a parallel port connector.
hi
i think thats an option that you have to buy it usually comes with the probe option . do you have a probe ?
at the haas site the price is " Coordinate Rotation and Scaling $1,295.00 "
i have deckel maho dmc 835 with itnc 530 control , using cimatron 9 , its a 3 axis machine.
i seriously doubt that the post will be compatible ... :(
if the cimatron version your using is...
hi
cimatron makes its posts for a specific machine !!!! , not for specific control because two machines with the same control can be very different.
which machine ?
which version of cimatron...
hi
i have disassembled a rf 45 clone into 5 pieces , each piece can be handled fairly easy by 2 men.
cimatron uses third party 5x module , and shares it with many companies like solidcam .... if you want more details pm me
switching to win xp , solved the problem completely :) , i would say win 7 isn't very compatible with mach 3 at least with my hardware, thx all for you replies .
thx
switching to mach 3.42 didn't help , couldn't find those bios seatings , i noticed when switching to "win xp computability mode " the axes movement is much more smooth , so maybe its win 7 problem ?...
thanks allot , gonna try to use older mach version , and the bios seatings ..
i will report here later
hi
i am retrofitting a rf-45 clone to stepper driven cnc. currently finished the y axes, the problem is that on a full range of y axes travel ~210 mm , i get a
1 ~ 5 split second slow downs...
thanks
hi
i am converting a rf 45 clone "zay" type , to cnc and have made cad models of the machine . they are accurate as i could make them with available measuring tools. its bare bone machine with no...
thanks
hi
i have a c11g rev 5.4 board , is it possible to control the direction of the spindle from mach and not only the on off function and speed. i have a commercial vfd with frw,rew and com terminals.
rev 5.4 board has only one mechanical relay , but it seems that i need 2 one for starting and stopping and the second for directional change. so how do i wire the board with just 1 relay ?
hi
i have a c11g rev 5.4 board , is it possible to control the direction of the spindle from mach and not only the on off function and speed. i have a commercial vfd with frw,rew and com terminals.
WE HAVE REPLACED THE CRT ON ROBOFORM 30 WITH AN LCD , JUST PLUG AND PLAY . THE ORIGINAL MONITOR WAS A VGA CRT.
hi
i have a rf 45 clone with the folowing motor specs :
induction motor
380 V
3.2 A
1.5 hp
50 hz
4 poles
hi
great site , thank you , i am also curently workng on a rf 45 clone conversion
hi
i am curently working on roboform 30 machine , i have tried to find i.p.s software for a long time without any sucess , it cost alot if u wana buy it from charmilles , so i just work with manual...
hi
i am looking for ballscrews supplier that makes international shippings , for rf45 clone cnc conversion , what i need is :
20mm diameter , and 5mm pitch ,c5 acuracy ballscrews and preloaded...
hi
i have used prolight when i was in college great machine , i dont recall any pci cards in the pc just a paralel cable to the controler. anyway u can search their site
www.lightmachines.com
i use cimatron for electrode design , i only use they electrode feature for very complex 3d electrodes , that i cant design miself .
here is a link to an ftp with lots of recources on cimatron
ftp://ftpcti.com/
i got software for roboform 30
hi all
i am planing a conversion , intrested in the biger machines because of the size of envelope and the ability to cut steels. i have a lot of cnc expirience working as a programer on deckel...
hi
working on cimatron for a mold company , modeling electrodes and programing deckel maho machines .