looks like the same as the grease bowl on a VF6, id imagine its the same thread as well.
Type: Posts; User: JoshuaBoulter
looks like the same as the grease bowl on a VF6, id imagine its the same thread as well.
you have an email i can scan and email to?
Did you solve this issue? If so How?????
Did you check the resistance from the output on the VFD to the motor? I would turn off and lock out, then pull the wires off the VFD going to motor, and the wires at the motor coming from the VFD....
Pretty wild end to this. So the motor wires that go from the drive to the motor were bad, long story short. Because of the routing, and the age of the machine, they started to break in half. The...
Pretty sure thats going to be the most real thing i read all day!!! Everything in life is a choice, either reap the rewards or suffer the consequences.
I worked for a company that made telescopic conveyors in WI, traveled all over the U.S. installing these things. Ended up getting some lung infection that is commonly caused by inhaling bat/bird...
I have a 98 Mycenter Zero with the Yaskawa Drive. When I do a M19, it will not orientate. It just rocks back and forth. Looking at the schematic, I was looking for an amplifier for the magnet. Cant...
I got it done, actually ALOT faster than what I thought it would take. I took a couple measurements off the old stud that the double arm sits on, and I was almost dead on. After 2-3 adjustments it...
Alright man, I can use all the help I can get. Ive went through half a pack of cigs, and 3 monsters and Im struggling!!
Quick update, after removing the cambox, 10 out of the 186 HHB that mount the front cover were backed out. I dont know how or why , but they were. Im finishing up today but everything is good thus...
Awesome, Thanks much for the reply. I started with this company less than a month ago, they do dry machining (wood, plastic, fiberboard) and the parts were getting soaked with oil. The oil quit...
Does anyone have any good info as far as timing, tool number, etc? Thanks in advance