The RFQ is now closed and was rewarded to P3d Creations. Thanks for everyone's quotes.
Type: Posts; User: z28
The RFQ is now closed and was rewarded to P3d Creations. Thanks for everyone's quotes.
Looking to have this DXF file cut to size see attached DXF. Its approx 12.5X12.5". Needs to be cut from 1/8 to 1/4 smooth plastic (coroplast or similar). Need qty 12 for a sign blank.
Please text...
RFQ is now closed. Thanks for everyone's quotes.
Looking to have these 3 plates laser cut from 3/8 A36 steel. +or- .005. I need qty 2 of each plate so 6 pieces total. See the attached JPG for drawing. DXF files also attached.
Thanks,
Shane...
The RFQ is now Closed and has been awarded to P3d creations thanks for everyone quotes. I appreciate it.
I need 2 simple bearing holders machined from 7075 aluminum. Roller table bearing holder has a 47mm bearing journal and a 16mm through hole that need to be +or- .005 all other dimensions are not...
Dont be afraid to build your own.
candcnc electronics are plug and play and come with a 2 year warranty. Tom the owner of candcnc has a yahoo forum that you can join to help with any questions...
Yes you are right you can purchase them for less than 3500.00 if you dont want to run a machine torch. The machine torch is 700.00. I also have a hand torch that I can plug it the hypertherm and us...
Here is a pic of what I built for 5500.00. You could build it cheaper if you wanted, Everything is zinc coated and powdercoated, I also decided to run the nice machine torch and billet Z axis. Sorry...
Build your own richard has no idea what he is talking about. The 5500.00 I spent includes a 3500.00 Hypertherm 45 with machine torch. Yes it took 7 months but I only worked on it for 3-4 hours every...
Build your own. Go with candcnc electronics and a DIY percision plasma gantry kit. Make sure you incorporate a water table to keep the dust down in the garage. Buy a mach 3 and sheet cam licence....
Thanks for all of the replys. I think I will go for it.
Shane
I am thinking about pulling the trigger on a new Tormach 770. I have never used a mill. I have built my own cnc plasma table so i understand the basics of cnc. I use solidworks, sheetcam, and I have...
Here is what I came up with. My machine is just a small 2x2 set up. I wanted everything on 1 cart.
You can only export 2d drawings from e machine shop. 3d drawings will only work with emachine shops service.
Ya, it seamed a little fast to me, but 190 is the slower setting in the manual for best cut quality.
Making a few first test cuts. Just finished my cnc plasma with candcnc electronics. I have a powermax 45 with machine torch cutting 12 gauge .100 steel at 190 inches per minute as per the hypertherm...
Just finished my 2x2 plasma table with candcnc electronics, hypertherm 45 w/ machine torch. I tried cutting out my first part and my 1.8 hp 7cfm @ 90psi compressor couldn't keep up. Ran out of air in...
Yes it starts at the lower left hand corner of the sheet but it passes the part, sheet and table and just keeps on going out in the middle of nowhere? Thanks for your help.
thanks for the offer but the rfq is now closed.
Trying to learn sheetcam for cnc plasma cutting. The problem that I am having is when I run a test cut (simulation in sheet cam) the cross hairs go from the edge of the table past the part and past...
I need qty 2 of the attached PDF file CNC plasma cut. I can provide a DXF file for the final 2 parts.
The 2 parts can be Plasma cut from whatever scrap you have laying around. No finishing is...
Im a Newbie here......I just finished building my CNC Plasma Table. The table is sitting in my garage. My garage is 1600 square feet of concrete floor. Outside of the shop is also surounded by...
Jim, thanks. Offer accepted I sent you a pm. This rfq is now closed.
http://i1163.photobucket.com/albums/q556/Shanejulie/plasmatableslat.jpg
I need quantity 2 of these parts cut out. They are slats that will hold 1/8 table rails for a cnc plasma table that I am...
http://i1163.photobucket.com/albums/q556/Shanejulie/DSCN0528.jpg
This is my very first table build. I used Precision Plasma LLC's Ultra low cost kit $800.00 for the gantry and the z axis. The rest...
Hello,
I am drawing up a part in solidworks. The drawing is done other than I cant figure out what size bore I need for a 21x27x15 7e-hvs nkn needle bearing. Ive searched all over the web. I assume...