I purchased these parts for a CNC project and didn't end up using them. Parts included in this listing:
DG4S-16035 (retail $160)
C82 Multi function breakout board with C78 Connection board...
Type: Posts; User: Floriptoolworks
I purchased these parts for a CNC project and didn't end up using them. Parts included in this listing:
DG4S-16035 (retail $160)
C82 Multi function breakout board with C78 Connection board...
Phil,
I'm not an expert in retrofitting machines but I have rebuilt a couple machines in my shop.
A couple things you'll need to know:
- - - Updated - - -
Phil,
Nice work.
Ryan,
I'm not sure why you'd be getting chatter but I think you may be right in considering the spindle bearings. I have two of these machines and one has head vibration at higher rpms. I suspect...
Thanks for the info. I'm getting an error from the machine about the tool change position. I'm considering buying a Centroid Oak board to bring everything up to date. I managed to find a manual for...
I have a Sharnoa VMC with Tiger 7 control. I use Fusion 360 for cad/cam work and need a post processor.
I haven't been able to find one and am wondering who to contact to have a custom post made?
I picked up a Sharnoa HPM 30 with tiger 7 control and the manuals with the machine turned out not to be the manuals for the machine. It powers up but I can't figure out the homing procedure. Any help...
Picked up a Sharnoa hpm-30. Turns out the manuals with the machine aren't actually for the machine. Tiger 7 Control.
Anybody have one they'd like to share or sell?
Info on the machines:
Machine One-
Partner 1 Series H
Serial 3186
Manufacture Date 537
Centurion 5 Control
Machine Two-
Partner 1 Series G
Hi,
I am at a loss here as to what my problem is.
I had my machine running fine up until a few days ago. I moved some of the components into a second cabinet due to noise issues through my USB....
I recently had a ROM issue with my 6T controller. Fanuc couldn't help me and the machine builder wanted more than I paid for the machine to burn a couple new EPROMS.
I plan to retrofit a new...
I think I have the 15hp spindle motor in my machine. I have an extra 10hp motor in the shop so I think I'll swap them out in order to avoid buying a new vfd. Waiting on a couple parts...looking...
Thanks Jim!
I have a Delta VFD-B
The forklift is a Clark. It's impressive, rated for 5,000 but will happily lift 7,500. Any more than that and I need someone acting as my counterweight.
Would they be able to write the Daewoo software? That's the problem, the bad EPROM was programmed by the mach maker.
I took some time today to start pulling apart the machine.
It looks like the spindle motor is a regular motor, not a servo? I don't know for sure but it looks like pretty standard wiring. Motor...
Well, finally heard back from Doosan...something about not being able to supply new EPROM. For a mere $8,500 they will come take a look at my machine.
I won't be taking them up on the offer....
Thanks Jim.
I've read a bit about the macros for tool changes in Mach3. Their website is currently having some problems so I can't do forum searches to read topics directly related to macros and...
I recently purchased a Daewoo Puma 6 that has a Fanuc 6T controller. It was working well until a week ago when one of the EPROMS on the board went out. Fanuc said it is a machine manufacturer issue,...
Purchased an Emco Turn 120 with TM02 a couple months ago and have been slowly trying to get it up and running. Bought a rotary phase converter 20hp with a CNC grade box, machine still won't function...