We've checked the connections and the fuse in the panel, everything was ok. We're sending the mother bord and the screen to fanuc.
Type: Posts; User: johnyto25
We've checked the connections and the fuse in the panel, everything was ok. We're sending the mother bord and the screen to fanuc.
And this how it's when you push the on bottom. You have nothing on the screen.
No I don't repair the encoder but just remove the plug and then place it back. Nothing has been done to the encoder.
In the electrical panel when power on there's no alarm. Please check the...
Yes I checked but it's the only spindle motor that's read's
Yes it is a separate speed encoder (position encoder) but not belt, rather a gear couple with the spindle it self in the spindle head.
For sometime now we've not been using this machine because of an issue with the spindle motor sensor for like six months and after that fault was dealt with the spindle speed was not being displayed...
Putting the machine into emergency. Nothing is appearing on the screen and the machine is also not booting
Before I changed, I checked the spindle control parameters of another fanuc oi we have before changing and even I was chenging it to the original parameters but before that happens this alarm appears...
What the best thing to do now. We really need the machine to work.
Any ideas
Now the LED light on the screen bord at the back of the screen indicate 8. Please check the attached picture
At the back of the screen bord you will see the led light (status alarm ) indicating please see the attached picture
Please this what I changed to, please see the attached picture
Same happened earlier before this actually happened and even I was just put back the old parameters, please see the attached picture
Having problem with fanuc oi-TD after machine shut down by it self whiles trying to put back spindle control parameters. Before machine shutdown the screen went blank and CPU local dram error appears...