I would still consider fabricating your own telescoping sheet metal covers. Those (pleated?)bellows are going to inhibit the discharge of debris/chips. The only problem I see is having enough...
Type: Posts; User: Bloy2004
I would still consider fabricating your own telescoping sheet metal covers. Those (pleated?)bellows are going to inhibit the discharge of debris/chips. The only problem I see is having enough...
I agree with you entirely. I dislike them too. I hope to see in your build here the use of telescoping sheet metal covers. they will shed the debris much easier and cleanup would be much more...
Nate,
Have you explored the retractable window shade rods? they work similar to garage door springs just a much smaller scale. Maybe the core of the drums could utilize that. I've seem some DIY...
That's the toaster I'll be getting. But for my purposes, I think I'll be making up a socket to easily plug in the Pid controller connections. The SSR will be mounted in the oven but the Pid...
Thanks again!
I'll need a higher rated thermocouple. I see there is one available after March 12th: K type high temperature thermocouple for heat treatment [WRNK-191] - $18.62 : auberins.com,...
Thanks! Any info regarding this would be helpful...
You've done so much already!
John Meissner
Hi Jason,
I've been meaning to dabble in reflow procedures and since you did such a nice development of a kit using reflow, I thought you might want to elaborate on your oven. Just things like...
I didn't see the post... I'm SOOoooo curious now to know what it was !
All this chatter had me searching for what was said....but to no avail.
Thanks for posting those pics, Zafar.
Everything looks Great! Yah, would love to see upcoming operations on video. :)
Before your "upgrade/conversion" it must have been time consuming and...
could you elaborate on the conversion procedures for fitting the ER-11 shaft into the outrunner motor? I'm not yet familiar with the outrunners but you have made good use of it as a spindle.
...
Hi Timbob, Tropopv,
Could you guys post pictures of your QCTP setups?
Thanks!
You need to reverse your step direction for the X and Y axes. Your table should move right when you jog left(negative). For Y your table should move away from you when you jog Y negative.
Way back in post 72...http://www.cnczone.com/forums/318440-post72.html
there was one of the final mentions of the rapid tool changer. I believe that Joe had thoughts of making an ATC using it as...
Here's a video you might enjoy...
notice the use of a center for extra support... the workpiece isn't much unlike yours.aside from the material.
Check out his other videos.
Well Screwed Part...
Are those joysticks analog? ...in that they also vary speed depending on amount of throw?
I like your control panel!
...and that keyboard..Are they still available someplace?
Simmer down, handlewanker!
These machines combine the tailstock with the steady rest. There are times when the tail stock is removed(three bolts) and the steadyrest is moved between the chuck and...
Well, you may get another call-back in the future to fit out a new bearing system and speed range for the quill. I'm just thinking of making at least slots along with the holes it will be drilling. ...
I would think now it should be called a MILL-drill..:)
It appears to have great milling capabilities now after the conversion.
..looking forward to a video of the machine during a milling operation.
Thanks for those pictures!
Did someone record the shipping process? It seems like it would have been something to witness. :)
Did you find out? I mean, why you suddenly started having problems? Is your sudden problem with the machine all worked out now?
Hi Zafar,
Does that Dell compact computer have integrated video? Or is there a separate video card attached in a PCI/PCI-e slot?
From my perspective, it looks integrated. If so, that is good to...
Is that the GS22PO model? ..and can you mention where you ended up getting that threesome(VFD, resistor, reactor) from?
post deleted.
please disregard... video cleared up my observation.
..again, nice work!
Very nice mill bed/table system!
It will be interesting to see how far you go into the electronic bells and whistles. :)
I suppose it will be up to not what you need, but rather what you want.;)...
Oh my god! You're quoting from Breitbart!
So all those businesses left California and lowered the revenue despite increased taxes. All it shows is that those who don't want to be taxed are greedy...
Here's a chart for identification
Your interpretation of my position shows just what a small mind you have while keeping it buried in the sand. (Was that an insult?)
This is SOOooo ridiculous. You have not a clue as to the...
Global Climate Change Indicators
Excerpts below taken from above link.
"How do we know the Earth's climate is warming?
Thousands of land and ocean temperature measurements are recorded each...
I'm pleased that you like my humor!
Yes!
(But I DO accept some of it for the reasons expressed so within its body.)