Search:

248896
248898
248900

This is the second CNC I am working on using the Openbuild V-Slot system and CNC sheild v3. Will be running 4 nema17 and a 400w spindle.

248764
248766

Hi...havn't posted in a while but tought I would start posting pics of final design. X and Y running GT2 belts, with Y motor mounted under the bed . Z is tr8x2 leadscrew All working well. I am...

Thanks tahustvedt!. One rotation is about 35mm with a 18t pulley. Originally I was going to run the gantry with one belt (on the right hand side) as I was confident that it would run the the gantry...

Ok, so i have the dual belts set up. Just need to replace the 6mm alum shaft with the 6.35 steel one before hooking it up to the motor with a coupler and then line the belts up nicely. Seems to work...

Anyway, after alot of time reworking my plan, I have revamped my machine. With nema23 motors, i am setting up dual actuators to run the gantry (x axis). Have to attach braces on the back of the...

Hi guys, just thought i would share something I am putting together for a project. I live in Australia and was trying to source 1/4 eccentric spacers, and while they are cheap enough (about $3 each),...

Well after dwelling over it for a couple of days, i have decided to go with the mdf solution :)219044

As well as that I have been looking at how i could make a cheap backlash flange. Not sure if...

Hi guys, thought i would share my project. After researching for days on the internet i decided to put a kit together for a fixed gantry CNC machine. Just thought i would share it with you guys as...