Plasma table driven on both sides of X axes with Gates LL-8M-50 (each belt is approx. 24 ft by 2inch wide). When cutting a test square there is overshoot when going from X direction to Y, similar to...
Type: Posts; User: Bap
Plasma table driven on both sides of X axes with Gates LL-8M-50 (each belt is approx. 24 ft by 2inch wide). When cutting a test square there is overshoot when going from X direction to Y, similar to...
Hello again, thanks for your responses, they are appreciated.
I realized after posting my thread yesterday that a background of what I am trying to accomplish may be helpful.
I have rebuilt a...
Looking for assistance on generating the code thru AS3000 by Camsoft.
My problem is producing the head raise or lower, plasma on or off when moving from one path to the next.
I had talked with...
Retrofitting a plasma table which previously had a Num720 controller as well Baumuller D/C motors. Have purchased Camsoft Lite & Galil 1822 motion control. Found Baumuller drives drift without I/P...
Retrofitting a plasma table which previously had a Num720 controller as well Baumuller D/C motors. Have purchased Camsoft Lite & Galil 1822 motion control. Found Baumuller drives drift without I/P...
I am currently retrofitting a 2-axis Plasma table with Camsoft and a Galil motion controller which I have purchased. I would also like to replace the Baumuller amps & motors of which were 3.8N-m,...