I have one but it's not free.
Type: Posts; User: cbr_speedster
I have one but it's not free.
Does anyone have a sample program for a Burny 1250 or simular machine? I'm trying to get mine going and missing something in the program.
You need to get a single point threader and thread mill it to the pitch you want.
email sent
Are you talking about the tool mount beside the sub?
Did you ever get the M32 post? I have the M32 post but can't give it away since I have many hours of development time. However, I would be willing to sell it and the Machine files for good...
Would anyone have an Esprit .asc post for a HAAS SL30 lathe? I have one but keep getting an error and can't figure it out.
Ok, I got the files to attach in a WinZip file. The Program (.NC) I posted and the Esprit (.esp) file. This does a simple face, turn and cutoff.
Here's a sample of a simple FACE, TURN & CUTOFF off an L20 Swiss.
Ok, what do you need help with? Maybe I can help..
Is anyone familiar with building machine setup files for simulation in Esprit? I'm building a Template file for my CNC router and not sure how to get the Y axis to move in Y with the head. It moves...
It's very complicated but here's a short version. You need to create models of the components you want to use in simulation. Pick, then save as .stl files into a folder for later use. Go Solid...
I run an inch post on my Laguna IQ and it works fine. All you need to do is change the post to call Feed rates in metric..
N2 (Filename: .236 Rough)
N3 (Saturday August 04 2018 08:01 AM)
N4...
The beginner class of Esprit will review machine setup and creating templates for each machine but probably won't cover much on tool holder setup. I had to model the tool holders and how to place...
There's many factors to SFM, Have you heard the old saying? "You can't cut, what you can't hold" That saying is very true. SFM recommendations may work on a rigid machine with 1000psi through...
You can, as long as the flute dia. is the same as the shank dia. and you don't do a finish pass at full depth. fyi, Some software adds the finish pass automatically in the roughing cycle.
Have you guys tried Esprit? I've programmed just about every type of machine with Esprit and it works awesome for 4th axis, HMC's, Mill turn lathes, Swiss, EDM, etc. I think it depends on what you...
Did you get your Laguna router hooked up and going?
Still need help with this?
Little late but my two cents,
A company needs an Esprit programmer for 18 months ..... to basically train current employees, setup everything to run smoothly and make sure the posts are perfect only...
What about it?
You can also smash a model with no geometry to get geometry. It's a pretty handy feature. You're welcome.
There's already software that can do this,,, The G code is read so fast who cares how long it is? You can't read it anyway.. Sorry, but I think youre beating a dead horse..
Have you heard of...
V-Carve Pro is cheap and easy but powerful for engraving
Setup the text for whatever you want like the picture... (Text Entry) Place the text where you want it to wrap the model.... Be sure it's orientated properly using the correct workplane... Once...
You can save the models as a parasolid from one file and merge the parasolid into another. I have replicated esp files from one to another but it takes time and you need to know the steps. However,...
I'm a sole believer in Esprit for Swiss and Millturn lathes. I worked in the quad cities programming Citizen Swiss lathes and once the posts were tweaked Esprit worked great with no hand editing. ...
Esprit works great for Citizen.. The simulation is awesome but the machine stl's that came with Esprit sucked. I created my own models for simulation...
Click on the chain, move cursor to open area on screen, right click, copy, click on arrow for list, click smash.. Done.