PROBLEM SOLVED.?
I finally received a message from Mach Support and Newfangled saying that the .066 version of Mach3 has been causing a lot of errors so it has been removed from their website and...
Type: Posts; User: legendarylarry
PROBLEM SOLVED.?
I finally received a message from Mach Support and Newfangled saying that the .066 version of Mach3 has been causing a lot of errors so it has been removed from their website and...
I'm using an ethernet connection to a Warp9 ESS. I haven't had any response from their forum.
I just tried setting up a new profile. Still gives me an error.
I had already tried that but I just tried it again. Still gave an error.
Here is my .xml file. Change the dxf to xml.
All the g-code *.Tap programs that I've run many times before with no problem now all give an error when the spindle shuts off. Here is my .xml.:
KL-6090_router.xml
I am trying to attach my .xml...
In response to ger21:
I replaced the m5.m1s in my Mach3/macros/router profile. I use one that was from a post on another website that suggested I replace all the spindle macros. I don't see a...
Thanks for your response, Macteck54. My files have been generated for me by Artcam 2011. They are files that worked in the past. But when I ran them this week, they would get stuck on an arc. Adding...
Thanks for your reply. I replaced the m5.m1s but there was no change. Then I replaced all the spindle macros: m3.m1s, m4.m1s, m5.m1s, M6End.m1s, M6Start.m1s,
and spindlespeed.m1s. There is still no...
It ends with a home move, M5, and M30. The program end doesn't really matter though, because it does the same thing if I turn on the spindle with a M3 and turn it off with M5 in manual mode. I tried...
The title should say "DoSpinStop". Not spindle. I am using windows8.1 with an ESS with Mach3 on a router. Has worked fine for 2 years. Today, program would start and run but just stop moving on an...
OK. I'll try it. Thanks.
I edited the button script on one profile and saved it under a different name but when I opened the other profile, the same edits were on its button. I only have the 1 mill screen that came with...
I got everything working fine now.
Relays are replaced. Works fine. Thanks.
I only have one computer with Mach3 to use on my 2 mills. Each machine has a probe pad that has a different height. I use a different mxl file for each machine but I am unable to edit the auto tool...
The voltage to the relay is 23.94V. It has a 24V coil.
This PM-940m-cnc-VS has an automatic oiler that is driving me crazy. It has a timer set to 30 minutes, and a run time set to 18 seconds. If the machine is powered on it runs, even if I am only...
The relay wouldn't close until I tapped on it. The magnet wouldn't energize. When I tap on it, the Led inside lights up, I hear the click of the relay and the spindle starts. Could be a bad solder...
Thanks. I didn't think about buying a different brand. I ordered 2.
The relays that are bad are OMRON MY4N-J. The coil wrapping says 24VDC. The case says 5A 240VAC and 5A 28VDC. It has 14 pins on bottom. Amazon doesn't seem to have them. I haven't found a supplier...
You are right that these bad relays only control the forward and reverse. Both are bad so I'm looking for close replacements with the same type rail mount. I hope I don't get any sticks. LOL
Well, this morning, the spindle wouldn't work at all. I had been thinking the problem would be with the VFD, but I decided to troubleshoot the old fashion way. I got out my meter and followed the...
One other thing I forgot to mention: When I try to restart the spindle without rebooting the machine, the VFW led show the correct frequency that the motor should be running at. But the motor isn't...
I have a PM-940m-cnc-VS with a Delta VFD015E21A inverter drive and 1.5KW 220v 3 phase 1720 rpm motor, Mach3 software on windows 8.1 with a nMotion controller card. The spindle starts and runs fine...
Has anyone been able to make a nMotion control card work with Mach3 consistently? I got a PM-940M-cnc-VS milling machine even though I had advised against it. All posts about it that I can find on...
I have just purchased the PM-940M-cnc-VS with the nMotion controller card. It works fine sometimes and other times it disconnects at random times and locks up the computer. I haven't found anyone who...
PROBLEM SOLVED. I finally got a reply from ROBOT3T. The solution to my THC3T-02 z axis problem was that it won't work if the z-axis step/dir setting in Mach3 is set to "active high". Seems like that...
I have installed the ROBOT3T THC3T-02 with step/dir on my Mach 3 machine but now the Z axis won't move. It just clicks slightly when I try to move it with keyboard commands. If I unplug the thc3-02...
That looks like just what I need. I’ll give it a try when I get to the shop this weekend. Thank you very much.