Bump
Still looking for a solution. Convert to usb or use parallel connector?
Controllers? arduino gecko . . .?
Software?
Type: Posts; User: Orangejbird
Bump
Still looking for a solution. Convert to usb or use parallel connector?
Controllers? arduino gecko . . .?
Software?
Paxton Patterson that was hooked up to a Apple IIe
5 pin round (din?) plugs to motors.
What's needed to make this work with a PC USB port?
Do you have a manual for the controller?
Torch moves up and down slightly about 3 times a second. Looks like it's trying to sew. Changing tip volts changes the height the bounce happens at. Bounces about 1/32"
Mach3
I'm probably...
DynaCNC With Cutmaster 52.
Mach3
Torch moves up and down slightly about 3 times a second. Changing tip volts changes the height the bounce happens at. Bounces about 1/16"
I'm probably missing a...
Do you think a wire wheel on the bench grinder will do the job? I see what you mean by the newer electrodes being so rough. Our old ones are much smoother along the flutes and look even better after...
Looking at one at a local auction. Looks very simply made and durable.
Anywhere to get parts if needed?
Are these being made anymore?
Don't see a website anywhere.
OK, when I get the file I want to cut loaded into Mach3, I can cut metal that doesn't warp by leaving the THC off.
Question: What are the steps in Mach3 to perform to properly use the THC on thinner...
Will this work?
G540 4-Axis Motor Control
Any links you can point me to for reading how to do this?
Thanks!
Any way to retrofit this old Apple IIE Paxton Patterson-spectralight clone to a PC?
Not yet! Gotta call a guy that PM'd me who thinks he can help.
Thanks for looking.
We tried plasma cutting a fairly involved design in 16ga aluminum treadplate and it was warping considerably.
Was wondering if we could router it with a 1/4 HSS bit? straight flute double cut
If...
Hi. I'm looking for help setting up to cut 16? ga. aluminum treadplate.
I'm using a dynacnc w/cutmaster 52 machine torch. 60A tip.
Can someone recommend cut speed and tip setoff from plate?
what...
Up to what thickness? 1/16"? What IPM for 20amp on different gauges?
Anyone made spinners or have DXFs of the windspinners with the concentric rings around an object?
Anyone know a good rule of thumb for settings?
I ruined a 60 amp tip on only one cutout and I'm sure I didn't have the right tip voltage setting for my tip OR material because the torch didn't seem...
Anyone know a good rule of thumb for settings?
I ruined a 60 amp tip on one cutout and I'm sure I didn't have the right tip voltage setting for my tip OR material because the torch didn't seem to...
What would be a good starting point for say a Cutmaster 52 with a 30amp tip cutting 20 gauge mild steel.
Anyone know of a chart ?
Want to have it set close for ATHC to work well.
How about IPM...