Search:

I need 4 axis post processor for delcam PowerMill 2012 for Mach3 controll.

Thanks

The new DSP 2013 AWC608C
http://yesii.info/a/201301/awc608c.html

My movies.
Cutting 2 - 3 - 12 mm plate with HyperTherm PowerMax 65 - YouTube

Hello! Do you some 5 Axis Foam Cutting program with option for rotative table? I want to make this kind of CNC but I can't find any suitable program. Thank you!

ThermoCut_car - YouTube

I have finally configured the THC.

It is working awesome!

PowerMax65 with THC - YouTube

Hello. I use a MP3000E-DTHCII. I've done the first tests. I have calibrated the Torch Volts at 126VDC, but I can make the settings only when the Reset button is off (it tilts between green and red -...

Hello. I have bought a MP3000 DTHC. I decided to make this cable myself. I'm going to use it with PowerMax 65 connected via CPC port. Is the polarisation in this image ok? Thank you!
...

I have put the watertable. Here are the first cuts. There's less smoke.

http://www.youtube.com/watch?v=NJ6wlqGnn-s&feature=youtu.be

I have finally mounted the grill table.
Here are some cuts from a 12 mm thick plate with 65A. It went awesome!

http://img20.imageshack.us/img20/9025/dscf6018o.jpg...

I'm waiting for the THC from CandCNC.

I hope it will work well.

@Arthur I had a wooden grate and that was the reason for so much smoke (and it was too cold outside to open the windows).
...

Hello.

These are my first cuts for my water table without THC.

http://www.youtube.com/watch?v=4tjOUvkVVDY&feature=youtu.be


New photos from the construction.

Hi. This is an awesome project, it is well built and constructed! Congratulations!
Are you satisfied with the Proma Elektronika Torch Height Controller? I've started a project too (with a PowerMax...

Hello. I asked asked candcnc about the THC, but they didn't give me any answer regarding the shipping to Romania. Perhaps they don't want to sent to Romania. What do you of this Proma-Elektronika -...

I've made an other cnc after the Mechmate project before and got some experience. I have prepared the aluminium on my old cnc Aluminium Milling Mechmate - YouTube

Hello all! Thanks to everybody for the information, I've gathered anything I could from everybody. I'll use a PowerMax 65 and water table. Later I'll buy a THC somewhere from Europe.

Here are the...

Hi balestraio!
I've bought a SMMA-250PI inverter from Stamos and I'm not satisfied with it. It had a fault after just one day of use and they couldn't give me a proper warranty. These Stamos are...

Nice !

Can you give me some details about the ArcOK signal? I'm thinking to buy Powermax 45 with a good price.

Hello! Congratulation for you project! I'm want to make a cnc for plasma cutting, too. What Torch Height Controller did you buy? What do you think of this plasma cutter Plasmaschneider CUT 60...

Frumos inceput , pare solida masa .
Astept sa vad cum avansezi .
Good luck !:banana: