Search:

Well, it didn't take long to develop more questions. In the thread I referenced in my post (#8 above), a Senior Member of that forum, bnelson, wrote . . .

2) How you wire the shop setup will...

The instructions for the device, which the fellow gave me, states it's a HD-CNC 240V model with built in starter. Photos attached of what I bought (the label on the side of the panel indicates it's...

Thanks for the advice Waynno. Here's what I did. First, I got my power company to upgrade my transformer (25kVA to 75kVA). Yesterday I picked up a 20hp American Rotary rotary phase converter off...

Tell us more about the calmotion usb, please.

Not to hijack your thread but I too am in the market for a single phase inverter. I posted about running it off a VFD (below) so perhaps we can help each other.
...

My heart goes out to you because I've been in your shoes. In fact, I just bought my first Fadal last week, also a VMC15, 1995 vintage. That said, you're in Atlanta and they're in CA, they're rushing...

Can you inquire about what he did and share the answer?

Hi Al,

I'm presently using an Hitachi SJ700. This is what they wrote on using their VFDs in my application . . .

Sizing Three-Phase Inverters for Use with a Single-Phase Supply
Although...

I have single phase in my building. Since FPL quotes $23,500 to bring 3-phase from across the street, I am interested in ways of making single-phase do the job (at least until cash flow says...

Sorry guys but I am only now getting into the loop again with CNC Zone because I rarely visit. The case for the atom CPU is something I purchased locally. Call me if you like at 407-302-3361 and I'll...

It works. I've been busy with other things recently but hope to turn my attention back to this again soon. What are you planning on resurrecting with this? Anyway, my advice is go for it!

Thanks for the update. I am trending toward Mach3 and a CSMIO controller for the lathe because they (CS Labs) say they have done such conversions and have a VB macro to handle the turret. Moreover, a...

My Bridgeport Series II was retrofitted with steppers a few years back. Now I'm thinking of switching to servos instead. Meanwhile, based on Hood's recommendation I'm about settled on CS-Labs for the...

Yes, some of this model hold up to 12 tools but this particular model is for 6 tools instead.

1. I forgot to respond . . . yes, after1 full revolution we will see 2500 pulses to the counter board.

2. Yes, I have a PDF for the turret. It's in two parts and I have uiploaded both as well as...

OK, since the spindle has an encoder and the lathe runs on VFD, then CSS may be doable. I will investigate further. Is it unusual to desire this, or is it pretty much standard stuff in the CNC lathe...

1. Encoders? 625 line count quadature.

2. Meanwhile, I found the schematics! They were buried in the power cabinet. Anyway, at 11x17, they're too big for my scanner. As soon as I can get them...

I've learned the servo motors have a tach and the encoder feedback, which are separately mounted (and they're driven by a cogged tooth belt).

Aternatives abound. Similarly, I am looking into a retrofit for my Anilam equipped lathe.

Anyway, my first choice is FlashCut CNC . . . but their initial quote of $5k is a bit more than I can...

I'm ready to ditch the Anilan Crusader IIL on my CNC lathe and leap to PC control. Moreover, I'd prefer to keep the existing analog servos and limit switches. I've narrowed selection to;

1....

I've a verbal quote from FlashCut CNC of neatly $5000. That's about twice what I thought I'd spend. Not saying it's not worth the extra $2500, just that I need to be sure it's worth it before pulling...

Jess and Sansbury,

I've not posted in Controller and Computer Solutions (yet) because I first I wanted to delve into the more than 500 threads within that section of CNCzone to see what answers...

Ben,

What's happened since your January 19th post?

I've a Crusader IIL on my lathe with 6-tool turet and two (X and Z-axis) 140VDC SEM servos.

I'm ready to ditch the Anilam controller and...

Both X and Z-axis motors are 140VDC and manufactured in England by SEM.

X-axis data plate:
Class F 25°C
Max Current: Continuous 5.8A, Peak 30A
RPM 2400
Max Voltage 140VDC
Torque Stall 3NM...

Riviving an old thread . . .

The lathe has me pulling out my hair. Anilam controller . . . argh! Sometimes it works beautifully, more often, not. $500 here, $500 there, I'm tired of it.

Anybody...

I just bought one of these and am leaning towardc converting to PC control with Mach3 (like on my Bridgeport CNC mill). However, I am more than willing to entertain the thoughts and ideas of others...

I'm seeking to purchase a VFD to power my 3-phase 7.5 hp motor from my single phase panel. Is there a favored supplier, e.g. Omron, Hitachi, Yaskawa, or . . . ?

I'm using a 1500W Omron unit for a...

Good morning Mike, thanks for the reference to Warfield's website!

Thanks Mike, your words were some, which pushed me over the edge.

sansbury, I agree 100% with your thoughts vis-a-vis how in house won't be cheaper, but I'm not looking at only the costs. And...

Come mid-April, when the pool is still a little on the cool side still, my wife is the type to take 5 minutes easing her way in. Me? The less I know the longer it takes me to make a decison but...