Hi all
Can anyone point me in the direction of a post processor for a Heidenhain TNC410 using Bobcad V25.
I usually use Mach3 but have been given access to a friends machine for a larger...
Type: Posts; User: Flying Scot
Hi all
Can anyone point me in the direction of a post processor for a Heidenhain TNC410 using Bobcad V25.
I usually use Mach3 but have been given access to a friends machine for a larger...
Sorry,
I did not keep any of the boards and I never had the software. That is why I changed to Mach3. I also did not know about boxford retro then.
My Machine was a later model as it had already...
I completly stripped out all but the stepper drives, spindle drives and power supplies. I the installed a Cambell Breakout board and it now works well running Mach3.
If you want to keep it as...
Has anyone used any of the servo motors supplied by zeal cnc.
I am thinking of using the BL90-600 (600 watt) as a spindle motor with the Granite devices VSD-E drive. I have had a look around the...
Herbert and anyone who can help.
I have a Boxford VMC 260 cnc mill which I converted to run on Mach3 a few years ago.It has been working well apart from the spindle motor.
The standard motor is...
I am having problems with the old Lenze motor on my Boxford 260VMC and I am investigating the possibilties of converting the spindle drive and motor to DC Brushless.
Does anyone know what motor...
I have just carried out a complete re-install of Mastercam and all is working now. Surface toolpaths now working properly.
Regards
Arthur
Definately right license. On starting Mastercam it shows Mill, lathe etc. level3 so it seems strange.
Arthur
Hi
I am new to mastercam but have managed to create lathe and mill 2D toolpaths. However when I try to create a Surface rough toolpath for milling I get the warning "Level 2 is required for...
I have a boxford VMC250 (1991 I think) which I intend to convert to run Mach software.
It has Parker digiplan SD3 Stepper drivers but I am unsure what the motors are as there is no identification....
Has anyone converted a Boxford VMC 260 to run with different software?
I have a Boxford VMC 260 which has Parker Digiplan SD3 stepper drivers controlled with a Bradford Instruments serial...