Hi, could you elaborate a little?
Type: Posts; User: ironofeden
Hi, could you elaborate a little?
Hi I have a fanuc omf, I recently had a repair done that wiped my parameters, I have written in the parameters by hand however the parameters for the keep relays etc don't seem to have a page to be...
Hello...Does anybody have the alarm list for a mazak qt10 with mazatrol T plus control.
i'm getting alarm 201 circuit breaker alarm and breaker qf15 keeps tripping out, any suggestions would be...
Hi lOOKING FOR A COPY OF THE OLD ESPRIT W 1997 DOES ANYBODY HAVE THIS OR KNOW WHERE WE CAN GET IT
regards
benjamin
John
We are unable to home the c axis as a result the spindle will not follow any speed commands it will only travel at the permitted homing speed of 20 revs. There are no discernible alarms on...
Hello John
We are using seicos l multi, trying to home c axis results in errors as previous thread explains. Starting spindle without homing c axis results in s1 servo error, after the spindle...
Hello
I Have problem with spindle/c axis positioning. M/C says 79702 position ng/ also spindle alarm 5202. We have the books for all the help they are. Does anybody know anything that might be...
Hi All
I would like to get your feedback on this subject. Sorry for the long explanation
Started a small shop 3 years ago, Brought 3 machines from a company going bust, took on the main guy...
Hi Harryn
Many thanks for your insight. Please can you explain the following point
our real cost of doing business this way is about 12 % higher than someone that gets paid instantly due to...
Hi All,
I have recently (2 years ago) started a small machine shop. I am having problems with cashflow. I seem to be constantly making call off orders for six months down the line and it affects...
no, i did that on purpose!!
thanks for your help though it was really useful
Hi everyone. I accidently wiped out our parameters from our mori seiki sl2h. I am trying to find the 9000 series parameters for the fanuc 10tf control. can anyone help??
regards
benjamin
Hi
I appear to have wiped out all parameters for our mori seiki sl2h does any one have a parameter list and instructions for re configuring this m/c
many thanks
benjamin
hi thanks for your input. i am running the job on cnc lathe with full flood coolant on the top of the tip. do you know what feed rate i should be using? what about spindle speed and constant surface...
Hi all
I am having trouble with parting off a job. 303 stainless steel 44.45 diameter
machining a solid disc parting off to the center. using wnt part off tips fx3.1no 15-m1 cwn740. The problem...
Hi
We have a Traub 4 axis lathe with sub spindle in which the nc unit has died
Traub want £7500 to fix the problem, the machine is from 1992 so i dont think that it will be worth the investment....
Hi
I have a few questions
what is cnc brain?
what are its capabilities
can it be used to change a cnc lathe to a different control
regards
hi does anyone have tactics for machining aluminium 6082, profile 80mm deep?
having trouble with the finish
regards
benjamin
Hello Does anyone know where to get traub spares
we are looking for
mc161-1c
mc431 mem a 1
mc431 mem a0
mc841
or a way to read the memory boards
many thanks
Hi Does any one know where to get traub boards from we are looking for
mc161-1c
mc431 mem a1
mc 431 mem a 0
mc841
or a way to read the memory boards
no one seems to support this control
many...
hello have pcb a20b-1000-069 edition 4b with over current alarm (alarm 12) does anyone have any idea what this could be?
any help or advice is very much appreciated
cheers benjamin
Hello, i have not changed parameters or encoder the machine cuts and traverses like this either in manual jog mode or in a program, do you know if it is possible for one axis to move too fast and...
hello we have a esprit lightning d plasma cutter, the x axis moves 0.02mm per mm too far when traversing in either jog mode or within a program can anyone suggest why this might be
cheers
...
hello mate if you send me the pics will have a look, i'm sure we can come up with a way of fitting your budget. my email address is [email protected]
cheers
benjamin
I have some st/st discs that i need to put a 1mm radial groove in 1mm deep on a 280mm pcd, should be done on a lathe probably but would i get away with making a fly cutter and doing it on a mill any...
hello i have a problem with traub tnd 350g second spindle would like to turn it off but cant get into parameters any ideas?
Hello i have a traub tnd 350 g with tx8f control and need to find out how to gain access to the parameters to switch off the second spindle does any one know anything about this machine or control?
Hi does anybody know where to get j56 collets i am based in the uk and these collets dont seem to be avaliable...
Hi mate if you still need help with traub i will be recieving the user manual mid week i would be more than happy to copy it and post it to you?
Hi mate thanks for your reply, unfortunatley i dont have any of the books either but i have managed to work out most of the buttons it looks harder than it is. you could ask traub if they have the...