Never got it?
Type: Posts; User: RDTS
Never got it?
My Google Foo didn't pull anything up for Vdi 20.
Won't let me upload a pic?
I wish. No joy there. I contacted toolholdershop out of Canada and may have them make me a few.
Were can I get boring bar holders for the Diplomatic turret BSV-N-120
From my research it looks like virtually all MAZAK QT-6G(Gang Tooling) were EIA-Dash Controlls
Thanks IEC79! In my hunt for EIA Dash I stumbled over the service manual. I finally figured it is G-Code with some Mazak quirkiness. I am hopeing that HSMX can post process my SolidWorks file. On...
I have a Mazak QT6 with gantry. Turns out it runs on "Mazatrol EIA Dash" I'm new to this, how do I program this machine? Is there a CAM program to feed it into the serial port on the machine?
...
This is an old thread revived. My questions I posted back in 2008 led me to just bite the bullet and I ended up picking up a FADAL 3016 VMC and a MAZAK QT6G with robot. Finally have gotten around to...
Doesn't sound good for the Phoenix RPC's! Do you think I'd have the same problem since I'm thinking about running one of their 40HP which is double capacity if both the Fadal (15HP) and the Mazak...
Delw
Yep! Grabbed the Mazak! It's a 1998 QT6G with the Gantry Loader. Also a 5” Kitagawa 3-jaw Chuck, an ATS 5C Collet Nose, seven (7) tooling blocks,they have 2 more they'll throw in plus a face...
I can officially say I own the machine, not here yet but on its way! Picked up a Fadal VMC 3016 (Remained by Fadal in 2006). Pretty clean except for paint wear around spindle and tool changer. I can...
I know this is an old post but you guys are still on cnczone so I'm asking for direction. If I have my machine set up with a VH65 and want to go to a TR65(Tilt/rotate) do I duplicate the gear from A...
This is probably a question for Neil. I have been offered a Fadal VMC 3016 reman in 2006. The serial number sequence indicates a March 2006 date (03200603xxxxx) they seem to have an extra digit on...
Maybe you guys can answer this for me? First, what year did Fadal go with AC Servos? Second, if I have a VH65(DC) Table, wiring and card out of a 1998 machine can I use it on a AC Machine like a...
Unfortunately KD Machine who was selling it to me (I committed to it on Thurs) called as I went to go down and pay for it and said another salesman had sold it a few days before. I thought it was a...
AntiChip's Shop is cool! Looks like same stuff as ours as far as machining equip., rifles on the wall and R/C Helicopters. ?Where's the muscle car or Harley you've got to have one somewhere!
Looking to buy a FADAL with a 4th Axis. I had one that we had committed to but lack of communication between salesmen ours was already sold. What I have settled on size wise is a Fadal VMC 15XT or a...
Well I guess I'm on the hunt again for a FADAL VMC! I had talked to the Jeff at KD Capital over the last week or so about a 95 Fadal VMC 15XT with 4th axis that he had for sale. After talking to the...
My 95 VMC15XT comes with a VH-5C. Can I uplug it and use a VH65?
To Little Bubba
I just commited to a 1995 VMC15XT with a 4th VH5c and was wondering what to check. What is a Belleville and a drawbar floater? Also what washers were you refering to that were...
I thought there was some turcite on the ways? So if the bearings are good the accuracy would be good? The most steel we would do would be 5" square by 2" high material, that being the case would a...
Hi Scadvice
Do you still have that transformer? I think I found a machine. Its a 95 VMC15XT in pretty good shape with rigid tapping and a 4th (VH5C) axis. I was thinking about a phase converter as...
I've been looking at the CNC Masters Supra and the Tormach. I need a bigger table than the Tormach so I'm leaning to the Supra. I've heard about the Industrial Hobbies Mill but their site is lacking...
I am in the process of deciding between Tormach's PCNC1100 II or a CNC Masters Supra. I am leaning towards the Supra because of the motor HP and the table size and travel. With the Tormach doing 4th...
Your right. I just called them and they thought is was 40x20 but it is the VMC40 30x16 small table. Its a spotless machine with laughable low hours. They said it sometimes sat for 10 years without...
Thanks for the info.
I talked to the guys at FadalCNC and they said to convert a FADAL to 4th axis was about $8K total with the board. I found a 94 with 4th axis indexer for 17.5K and a 97 (10K...
I saw a video on YouTube YouTube - New CNC Trunnion Table can be 4th or 5th Axis made by HTS and was wondering if a 1985 Fadal VMC40 can be set up like this utilizing Tormach's Rotary Table kit...