http://www.cnczone.com/forums/attachment.php?attachmentid=324764&stc=1
RC1325TS with 3 spindles, we add the device for pushing material automatically, very suitable for Plate Furniture making.
...
Type: Posts; User: ROCTECH-Vicky
http://www.cnczone.com/forums/attachment.php?attachmentid=324764&stc=1
RC1325TS with 3 spindles, we add the device for pushing material automatically, very suitable for Plate Furniture making.
...
http://www.cnczone.com/forums/attachment.php?attachmentid=324748&stc=1
If also interested in plate furniture making machine, please feel free to contact us.
[email protected]
Tel: +86...
THE REGULAR MAINTENANCE OF MACHINE
1. Every time after use the machine, should pay attention to clean up, be
sure to clean up the dust on the table and the transmission system, on a
regular...
This is our 4 axis ATC machine RC1325RH-ATC with table moving.
This kind of machine is more accuracy than gantry moving machine.
...
Hello Everyone,
On the end of March, from 28th-31st, we will take part in the exhibition in Guangzhou.
These are the machines will be showed on the exhibition.
They are very suitable for...
These projects are made by our CNC Router RC1345R in Romania.
Did you see them in Romania?
http://www.cnczone.com/forums/attachment.php?attachmentid=312806&stc=1...
BOATS MADE BY ROCTECH 4 AXIS ATC MACHINE
This little boat is made by our 4 axis machine. If you also need this machine to do similar work, please contact us to get more machine information.
...
SHARING SOME TRAINING PICTURES
...
SHARING SOME MACHINE IN AUSTRALIA PICTURES
This month, our engineer came to Australia for technical support. Thanks for our customer's entertain :cheers:
...
Hello Everyone,
We are showing our single arm aluminum cutting machine in Australia.
This is the machine which we showed:
...
Symptom:
1. The inlet line and all connections for leaks.
2. The oil level is too low, it can not be played on the exhaust valve seal role.
3. The oil is contaminated.
4. The exhaust valve...
Specific maintenance and repair process is as follows:
1, rotary vane vacuum pumps to keep clean, to prevent debris from entering the pump.
2, once a week to check the oil pollution. Before...
Rotary vane vacuum pumps by the pump (stator) and rotor components. Equipped with two or more slots in the rotor rotary vane, rotary vane pump some room is also equipped with a spring. A rotor...
This is our exhibition information, welcome to visit our booth.
CIFM /Interzum Guangzhou, 2016-Asia’s Leading Furniture Production Fair
TIME: 28-31 MARCH, 2016
BOOTH NO.: 9.1F18
EXHIBITOR:...
ArtCAM software product family is United Kingdom Delcam company produced the unique CAD modelling and CNC, CAM processing solutions, is the complex three-dimensional relief design, jewelry design and...
Type3 software is also the Almighty software programmes to address wood graphic design requirements. Running under Microsoft Windows systems, with the best graphic design software packages, and tight...
Usually, according to different size of machine, we use different modes of shipping.
There are three main modes of shipping for CNC Router.
1. By normal Container
20gp container 5.8*2.3*2.3M...
Thanks for all customer's trust and support in this year.
Hope more customer can join in ROCTECH family.
Merry Christmas and Happy New Year !!!(group) ...
Thanks for all customer's trust and appreciation. This will be our motivation.
We will go on to provide best quality machine and service.
Thanksgiving wishes for you and your family :)
...
There are some samples made by our machine RC1345R
http://www.cnczone.com/forums/attachment.php?attachmentid=299174&stc=1...
These product is made by ROCTECH CNC Router.
Our customer share these pictures with us. (group)(group)(group)(group) ...
VISIT CUSTOMER IN KUWAIT
This October, we went to Kuwait to visit our customer. We got the impassioned welcome.
Within a week, we visited customers, provided technical support and making...
HOW TO CHOOSE TOOLS FOR STONE ENGRAVING
1. Because stone carving, the tool must bear a greater load. Therefore, the stone carving knife than with 6MM diameter of the shaft. Ordinary carving...
How to choose tools for soft metal engraving
1. Aluminum cutting, recommended the use of single blade special milling cutters for aluminium. No sticking to the knife during the processing, high...
HOW TO CHOOSE TOOLS FOR DIFFERENT MATERIAL ENGRAVING AND CUTTING
1. Acrylic cutting, one flute spiral bits are recommended, smokeless and odorless when the characteristic is the processing speed,...
NEW CNC ATC MACHINE RC1530-ATC WITH NEW CONTROL BOX
This is our new design of RC1530-ATC with new control box. We attach great importance to the appearance of the machine.
Green and white are our...
NEW Machine RC1530-EOT with Industrial camera and EOT-2
http://www.cnczone.com/forums/attachment.php?attachmentid=293640&stc=1
This machine is with Germany Industrial camera and Germany EOT-2. It...
New control box design
Hello everyone,
This is our new design for control box. The main color is green and white.
...
The biggest difference between type A and type E is:
A-drive slots and the e-type not. so relatively speaking a large torque, relative to some heavy cutting. e-transfer of torque is relatively...
HSK vacuum handle of Germany standard is DIN69873, has six species standard and specifications, that HSK-A, and HSK-B, and HSK-C, and HSK-D, and HSK-E and HSK-F, common of has three species: HSK-A...