Search:

I have purchased a used MultiCam machine. The spindle uses alot of compressed air. I have a 60 gallon tank and the machine uses the air up (down to 95PSI) in about 1.5 minutes. Is this how much air...

Machine is up and running thanks to MultiCam.

Has anyone converted a multicam machine to Flashcut? I will also see if there is a Flashcut forum for this question.

you can post the file and someone will help or you can just click each line you don't want and delete it. Then send to laser.

If it is in Corel Draw you should be able to save it and cut it or cut from Corel Draw depending on what laser software you have.

I am still looking for the files for my multicam machine with a M2521 controller and ATC.

Thanks

Here is what motion mechanic is displaying after the machine is powered up.

I sent you a pm.

I am starting to understand why everyone on here hates MultiCam. They want $1500.00 to send me the files to try and make the machine function. WOW

Wow now I have really messed up the machine. In trying to square the x gantry I messed up the software. Now I really need the software again. The machine will not start up anymore. here is what the...

Is there somewhere that I can download new files for my machine?

Will this help?
{17} uCito M2521 V2.11c C100
16M RAM installed.
Chan0: 180224, Chan1: 512

MCIF...

Thank You to everyone that has helped. The first error is gone now a new one has appeared. The x axis is not able to home properly because it says that it is over diff >.002.
If I am correct I am...

Actually after the machine is homed it asks to do a test runup and I click return the machin move s to the middle of the table and then goes and gets tool 1 then moves back to the middle of the table...

I know that this is an old post, but did you find a indexer that would plug into your Multicam? I am looking for one now.

Thanks

Is there a list of error codes somewhere?
I opened the control cabinet last night and turned the machine on and watched as the error happened. It appeared that the VFD was unhappy and cut off when...

I was able to make the machine move around and seemed fine. Now that it is in my shop i am starting to get certain errors. I have read a bunch of posts about checking voltages but not where to check...

I believe this is the same company that calls their software Moshidraw. can you send a screenshot?

This machine more than likely uses MoshiDraw and it totaly sucks. If you want to buy the cheap machine to play with then I would suggest an upgraded DSP from LightObjects. It comes with a useable...

My shop is near Fort Worth, TX. If you still need someone to cut parts please let me know.

Thank you to all the people that have taking their time to create or recreate and post files here for us to cut. I am currently building my 4'x6' 150 watt CO2 laser. I have downloaded enough files to...

I can cut these. Where are you located and if you can send the file I can get you a price.

WoodChucksCNC

Aledo, TX.

I purchased one of these machines used and then upgraded to MoshiDraw 2013. I finally am trying do cut something and it stops during the cut as you stated. That is very annoying. Have you found a...

Well after diferent attemps I find that my problem is the the spray paint. I broke down and decided to try the old fashion way. Hmmm a brush and a can of paint.

Step 1 - laminate wood with...

No, I figure for my plaques my customers wanted a high contrast. I had some stain once that did well but I ran out of it. Well lets say it was a special mixture (had been frozen) hahaha. It had been...

I purchased the shelf covering paper (self stick).
6.00 per roll 20" x 22'
I covered the wood with paper and then V-Carved a test. The cut was very nice. Very clean edges and none of the paper...

Thanks, for the suggestions I will try the contact paper for shelves this weekend. Have you tried placing the contact paper first then cutting and painting, remove paper sand and clear coat?

I have been trying to find a good way to do this.
I use a 3/4 MDF that has a very thin maple vaneer im not sure but its about paper thin. I cut my plaques that are pretty detailed and then paint the...