Search:

Ok BTR I need help I am looking for information for the DNC 1.3 this allows communication with the Parallel port on a PC to CNC I was wondering if anyone had any experience I am currently hooked up...

Thank you Polaraligned I would love to purchase the gear from you this would put me back in business. You can call me if you would like I sent you a pm with my number. Thanks for all your help...

I am in need of a Z axis gear for a Bridgeport Boss 5 Mill. I am going to be be doing a complete rebuild on this mill with G203v and am willing to document the whole process if anyone is interested....

i was wondering if anyone has any information about using servos in place of the stepper motors that are currently on the machine? I would like to replace the stepper motors. I have already done a...

Bridgeport Series 1 CNC need stepper motor Drive Gear Z Axis and possible Z stepper motor I might be able to use any axis as I might convert it to Gecko drives.

Please help I am trying to make...

I am not sure where the perfect place is to put this. However I have a strange problem when using drip feed on Bridgeport Discovery 308 about half way through it will just do something stupid like...

Does anyone have a suggestion where to insert this question? I am looking for CAT #30 tool holders for a Bridgeport 308. And while we are discussing different tools the question I have is am I am to...

I thought the same thing when I viewed that episode. Thanks for the clarity in my mind I would love a show like this that showed the process of making the guns. Not five second clips. Liability is...

I am sorry to bother you I am in desperate need for a Bridgeport Discovery Manuals I have been flying blind. I have been able to get the machine back up and running. However it is weird the hard...

I am trying to find a service manual for a Bridgeport Discovery 308. Please help I am willing to pay. I would like the whole manual set or just the service section I have been able to get the machine...

Does anyone have the service manuals for this mill Dx32 Discovery 308 this link does not have them posted any longer?

I am also looking for a DYNA Myte 2800 if anybody knows of someone that has one that is a needing a retrofit. [email protected]

I have been able to come across some extra boards from someone that was upgrading their machine, and was able to get mine working great, I am willing to sell the extras that I have to help some that...

Madmac try resetting the MOL, this was causing the same problem with my machine it would not reset, i had to bypass the 24 volt line around the MOL I was getting the same error, had to then replace...

Does anyone have the EMC3 Board my machine was working great getting ready to do another project and all of a sudden the wait with a 2 above it and the board will not continue through its boot...

Check your Mach3 configuration, your encoders may need fine tunned.

Help I am going around in circles, I am having a problem pocketing, does anyone have the Setup file for a boss 8 using Bobcad 21? I need the configuration file, right now I am able to do basic...

This cool, I noticed that I could call any file in that directory on the computer, that as long as ezcam was running, example say I was working with program 0200.txt then wanted to switch to 0010.txt...

Please call me I need The a few boards and the 120 volt transfomer and the digital power supply, my mdc board is good I need the fmc board. Please call me 828-527-8443 I am lost without my mill.

Problem is on a different board, the 30 volts feeds the digital board, for those who might be tracking this thread in the future, if the 120 volt ac fuse to power supply is good blows the dc fuse...

Does anyone have any parts for a Boss 8 R2e3 I need the FMC board and transformer T1 I believe that it is the 120 step down transformer from 3 phase, is there a reason that I cannot use the other 115...

clean your table guides or ways, they are gummed up with old lubricant, had the same problem then did a balance alignment good as new.

I use mine for machine setup!!!!!!!!!!!

I am in the process of working on an Anilam M series, I purchased the mill and it was not working at all, I am new to servos however I have done design work with steppers, and have a degree in...

I have an idea, and looks like the most logical place to post it. I am thinking about starting a Co-Op group online maybe a thread, you see I am a College instructor. As a hobby I have a machine shop...

I am trying to upgrade from 230v to 460v at the shop on my Boss 5 CNC I have rewired the motor, I have rewired the T2 both for high voltage, I noticed that T1 is only single phase 125v could I not...

I just had another Idea using a Pic Micro to control Mach3 through the USB port very complicated but a good idea. Any comments [email protected]

Save your money Mach3 with steppers and Gecko 203s I just finished almost a Boss 5 with original sigma and superior steppers and the machine works better than when it was new. Easy upgrade I even...

You are correct there is a difference between microcontroller and Microprocessor.

I forgot about this thread, I will put something together for palm OS if anyone is still interested, I have been busy teaching engineering and IT, as well as upgrading a Boss 5, I however will make...