Search:

I looked at the D parameters that we were working in originally and confirmed nothing has changed in that area. However, I am concerned that something else might have been changed in error. Not...

Control: MSC-501

Hello,

We had an issue with our live tooling not orientating to the correct position. Turret alarmed out after tool change. We had to go into field adjustment mode and into the D parameters to...

There was a copy in the cabinet, i'm all set, thanks!

Does anyone have by chance? I only have the ladder diagram's...

Hello,

I have a Mori Seiki GV-503, with MSG-805 control. When I punch out the tool/work offsets, they are in metric. I have had no luck finding the correct parameter number to convery to inches......

Up and Running!

Thanks!!!

Hello,

I have a Kitamura HX250i, w/ Yasnac i80 control.
For some reason when I punch out the work offsets (From machine to the computer), On the B axis, the 90 degree comes out 900.00, or 180...

Hello,

I have a MX40HA, OSP7000 control.

I had a bad Y axis encoder, replaced with new one. Machine fired up ok, but am having trouble re-establishing position.

I understand RAPA value is...

Hello,

I just purchases a new used MCV4020 w/ OSPU10M control, it has OEM installed 4th axis interface.

Wanted to know how do I know what indexers will hook up directly. If I purchase a unit,...

Hello,

I have a LR-10 w/ OSP5020L control. One of our operators was adjusting a parameter that adjusts turret change tool position, by mistake, adjusted the wrong parameter that in result brought...

Hello,

Wanted to get some opinion's on what wireless system works nice. We have mostly Fanuc controls, with a few Okuma's and Yasnac controls. We currently are wired to each machine and use ProNC...

Hello,

I have a Kitamura HX250i w/ Yaskawa/Yasnac i80m control. My "Y" backlash is out about .0006" and after adjusting parameter #1552, my readings do not change...

I even tried adjusting by...

Machine is running!

I decided to change the parameter sequence to #2 (Knowing that my pallet was actually in the correct position). Then after that, the control let me continue on to step sequence...

I have tried moving the axes and giving the M60 command. Nothing moves...
However, when I give G30P3 command, all axes move into position. I do have both pallets in the machine and have confirmed...

Yes, I have confirmed ATC is on sequence #1, I went ahead and did a full manual ATC sequence (Just in case). It is back to #1. Rapid override is set to 0. I gave the G30P4 command (Pallet change...

I have tried bringing the Z out and cleaned chips very thoroughly...
I still cannot seem to make the Z axis A position switch...

I have a Okuma MX40HA, OSP7000 control.

We are trying to give an M60 command, and nothing happens. I have confirmed ATC is on sequence #1, and APC is on Sequence #1. On the diagnostic screen, we...

Hello,

I have a Okuma MA40HA w/ 7000 control. I would like to understand a few things on my random pot magazine.

1) Does anyone know the parameter number that can be changed to make the tool...

Hello,

I am trying to thread mill on a ZL200SMC MSC501 control (18i). Program I am trying:
(THREAD MILL 1/4-18 NPT, TOOL CUTTER COMP = 0)
G30U0
G30W0
M5
G98
G0G54T0808
M9

If so, any chance I can get an emailed copy?

Thanks!

MSC-501TA. I looked at the machine packing list, and the maintenance manual says 18i control. I am looking for the Fanuc programming manual, some how we must have misplaced it...

Thanks!

Anyone know where I can get one?

Thanks!