G13I.4K.88D22Q.38F20. will do a 1.76 dia start hole ending at a 2.8 dia with .38 stepover using cutter comp number 22 with feed of 20 IPM
I=finish circle radius. K=start circle radius.D= cutter...
Type: Posts; User: maz43
G13I.4K.88D22Q.38F20. will do a 1.76 dia start hole ending at a 2.8 dia with .38 stepover using cutter comp number 22 with feed of 20 IPM
I=finish circle radius. K=start circle radius.D= cutter...
Not all climate scientists agree.......
Peer-Reviewed Survey Finds Majority Of Scientists Skeptical Of Global Warming Crisis - Forbes
Maz
If a government does not trust it's law abiding citizens to own and carry firearms,
It's law abiding citizens should not trust that government.
The ultimate responsibility to protect you and...
CD machining-Things are going good with the Hanwha. I just passed 100,000 on the part counter last week.
Still running 10hrs unattended 5 days per week. The machine is reliable and holds size well....
The Goracle himself blamed the size of hurricane sandy on climate change.
I hope AGW does not become synonomous with AL Gore wins......
Maz
I also run firefox sandboxed. I have got several AVG warnings of threats blocked when entering CNC zone in the last couple days.
Maz
I run a 1050 and have been through the same symptoms twice.
One time the belt was loose. Instead of just tightening it I replaced it with a new one as it looked rough.
the other time the encoder...
Their "tech support" has SUCKED since the early '80s in my experience with them. I didn't know it could get worse.......
Maz
In MDI mode go to settings and change it there.
Works on Tee,Mazak, and KT21 w/ LX3 control.
Yaskawa has free PDF files online for all their controls and drives.
I sure wish Fanuc did.....
Maz
I have got away with a dab of coarse lapping compound between stock and jaw using soft jaws bore to stock size. Too tight on the jaws usually leads to bent scrolls. Some kind of dead stop would be...
I do that quite a bit.
Words to live by IMHO.
A good start would be an editor with backplot function along with
the G&M code book for your CNC.
You type code and it backplots the path as...
Typical Korean Machine tool stuff.
The factory adjustments and crap like that they leave to the customer to sort out.
The place I work got a brand new Hanwha swissturn that still has factory bugs...
Thanks for the tips.
I am getting 300 pcs per night (unattended) and solved my chip/part eject problem.
The groove chips were the culprit. My sub chuck has .02 inch travel from closed to open with...
I run a 1996 Kia SKT21 also a 2006 Kia KV25P.
The machines aren't bad but Kia service and support pretty much sucks.
At least that has been my experience with them.
Haas machines aren't bad and...
The ejection issue is the problem. Every once in a while a chip wraps and hangs in the groove in the workpeice, the sub swallows it and the ejector rod jams.
The machine has seven m-code selectable...
Yes, it does have wheels and that thought has crossed my mind more than once.
The part I am making is part of an assembly to make a "tee" and the customer wants 304l. It is for an automotive...
This has been my intro to Swisturn.
The place I work recently got a Hanwha XD20-h swissturn to run double ended "hose barb" connectors out of 304l ss.
The sales guy fed the owner a line of hooey...
This is one Yank that definitely concurs with Coxsteve's statement.
+1.
Yes, but TNR keeps the "triangles" out of my hair when operators change inserts that have a different radius.
Maz
I'll use it when doing contours I don't have the time to "find the triangles" with.
I don't have CAM where I work so I'll trig simple stuff and use comp on the fancy contours.
Maz
You could try DNC software. They have a free trial version available.
After installing you send a program from your machine to the PC and the software senses what settings to use for comm. It also...
Sad, but so true.
That about sums it up in a nut shell IMHO.
Maz
Can you even define "normal" climate change?
Maz
The struggle continues....
I finally have good parts but the chip problem is not over.
The machine and bar feeder still have more bugs getting worked out by the and my boss is getting just a bit...
Day 2-
Service guy was working out some bugs in the machine installation-
The high pressure coolant setup,ejector pin sticking, etc.
All trainers are gone.
I tried what I know works having...
Worked 10 hrs on the part and have yet to get a good one.
The Hanwha trainer won't come back and the service guys are about to bail on me.
The part is a double end hose barb major dia .428 minor...
That's Ironic-The first thing the factory trainer said to me was "forget everything you know".
As we wrote the first program he said always start with id work, then OD work progressing from front...
I Never programmed or ran a Swiss before-just three axis mills and two axis lathes.
The place I work at just bought a Hanwha Xd20H to do fittings out of 304ss.
Supposedly the programs were...
How about AGS....Anthropogenic Global Socialism.
It would seem more likely to occur than "AGW".
Maz