Search:

At 703 degrees C the zinc will oxidize. Put both the zinc and the AL in the crucible. cook it at 621 C. When the zinc melts it will start to "digest" the AL. If possible stir it the AL will go in. It...

I was wondering if this is possible?I need to cut a .125" radius on the top of a circle in the YZ plane all the way around.The circle has a 45 degree taper to it,the top diameter is 2.549",the bottom...

Could some one please explain G96 constant cutting speed.We are cutting 6061 aluminum .75" diameter 6.5" long.The part sticks 7.5" out of the chuck when we part it,it leaves a small nub on the part...

Thanks phx.That worked.It was funny to watch it deploy and the part role right off the end and not into the door.I readjusted it after that & it works great.

Thanks for all the help.I have the machine running and even managed an "IF THEN" statement for a parts counter.I was wondering if anybody knew how to get the parts catcher working.When I type M76 or...

I finally got it to work.After M03 I Put in:
G0 Z4.
G0 X6.
G94G01F5.X5.5
G94G01F5.Z3.5
G0 X6Z4.
I am still confused as to why it would not feed from the limits.

We have 3 fadals 2 3016's 95 & 98,& a 1990 6030.They are good if you need to do a lot of hogging off of material and have large tolerances (+-.005).We have had a lot of problems with the...

Thanks Okumaguy.I tried the g90 & g94 first thing this morning.Unfortunately it did not work,it gave me the same error message.The machine will run this program,but only if the moves are rapid and it...

Hello Dennis from Ansun .We wrote a simple program and got this error message. 465-3 alarm b plus var.limit x-axis 2.
The program looked like this.
m84
m83
m20 m24
g40
g50 s1000
t0101
m41...