Search:

Hi Joe, thks for yr input. One quick question: I am cutting wood, and although i have managed to keep the dust issue down, if i start lubing with a "wet" lube, wont i just make matters worse? Some of...

Joe, I finished your design several months ago and Id like to thank you again for the amazing work you have done! It has, however, taken me yonks to resolve all issues. I came close to stripping the...

Well, i just though id post an update:

I completely dismanteled my couplers and found that indeed there was sufficient play to allow some resonating and hence lost steps... After many hours of...

Stevo

Wow, you have given me a lot to think on and work with... THANKS for your long reply! :)

I am going to generate the code y suggest to test the spoke and see what gives.

I have...

I have tried "playing about" with speeds. From 200hz all the way up to 1000hz. I did some tests where i increased the speed in each test by 50 while maintaining the acceleration constant. At some...

I am getting close to tossing my machine to the trash!! I am that desperate!! :)

My problem:
When running a piece of code my machine is consistently off in the Y axis ONLY. When I start at y=0...