Hello JLS
You can get spare parts from Kuhn:
http://www.ersatzteilcenter.net/index.php?...art&tpl=&lang=1
Kind Regards
Andreas
Type: Posts; User: apoggel
Hello JLS
You can get spare parts from Kuhn:
http://www.ersatzteilcenter.net/index.php?...art&tpl=&lang=1
Kind Regards
Andreas
Hello
On my homepage www.industrielle-it.com, you can download CimcoFTP.
If you give me your data, I can generate a test key for you.
Most Dialog 112 can communicate over the network.
With...
Hello Florian
How exactly do you undertake the sending to the machine? Is the machine already ready to receive when you send the program?
What software do you use?
Regards
Andreas
Hello Marc,
I could probably help you but I only have time in about a week and a half.
Does the file transfer works already?
What control system does the machine has?
Regards
Andreas
Hey Kaschi,
my instruction says: switch over switcher 19S1 while machine is running.
Maybe that's it at the older Software-supply. Which one you got?
Greetings, Andreas
Hello Mischah
Have you got it done in the meantime or do you still need help?
Greetings
Andreas
Hello Christian,
you can find testsoftware for data transfer of Heckler & Koch at my homepage.
I would be pleased to helpyou with the set-up - but I am really busy up the end of the year.I 'll...
Hello Mischah
I understand that you don’t want to invest so much money in an old controller, as you would invest in a newer one.
But time and effort are usually not less.
Dialog12 can be...
Hello Alex
You need RTS/CTS but not Xon/Xoff after controller parameters.
And certainly the cable has to be soldered correctly.
Or try to adjust 772 to 3.
Regards, Andreas
Maybe someone has a perforated tape. One with RS232 can be connected to PC for reading out.
I’ll look for somebody who has one!
Regards, Andreas
I would additionally connect
25 - 9
4 - 8
5 - 7
To make a hardware handshake possible.
This cable would be for standard connection at PC (9-pole/DTE)
Hello Mr. Kickinger
Which controller is it? Dialog4 or Contour3?
Pin
2 - TD
3 - RD
4 - RTS
5 - CTS
Hello Incubus
Do the both special machines have to be bound to the machine via the workplace or are there any more machines?
Are you going to administrate the NC-programs via the file system or...
Hello T.S.
What controller do you have?
Andreas
Hello Oldtimer,
have you solved the problem already?
Otherwise I can help you.
Regards, Andreas