Search:

Its a brand new machine. ordered for me. The only thing they did at this point is to get me a new transformer (right size), "gifted me some T-nuts", and they're claiming now that they have fixed the...

Hi guys,

4 years ago I've purchased brand new Hyundai Wia HD2200 - great machine, works great. no problems, tight tolerances and all.

Two months ago I've got another new Hyundai Wia HD2200Y -...

That's what I get when I turn off the system comp.
It goes strait to the end point and misses everything

(ROUGH TURN - G71)
N09 G71 U1. R.1
N10 G71 P11 Q13 U0. W0. F.38
N11 G00 X34.7
N12 G01...

when I turn off the system comp. here is the result :

(ROUGH TURN - G71)
N09 G71 U1. R.1
N10 G71 P11 Q13 U.3 W.3 F.38
N11 G00 X34.7
N12 G01 Z0.
N13 X49.5 Z-9.983
N14 G40
N15 G00 X127. Z127.

I've managed to do it !!! :D

Thank you all very much :]

Tomorrow I'll try it on the machine... and I hope that everything will be cool.

Hi,

I've managed to make it... the problem was that I wasn't using system compensation and now its generating me the code. But I've got another problem: I made simplier contur which to generate...

Hi again,
I've sorted that out with the generating the G-code.
But in the Gcode where I use canned cycles - G71 for example
G71 u...r...
G71 p...q....u....w...f....

The P and Q are two...

Dear,

It didn't worked what you told me to try.

Here is attached the drawing.

All I want is the path from the G71/2/3 code with R0.4 of the cutting tool and also with system compensation ON...

Hello,
I have created a contour in AutoCAD and opened it in BobCAD-CAM v.24 and after that ... i've choosed the stock , choosed roughfing and everything ... I see the tools path around the part but...