I only need the dir, clock and the 12vdc and 0vdc. as soon as I try to hook up the clock pin the motor starts moving erratic. If I to the clock pin to ground the motor does the same thing.448756
Type: Posts; User: gv71
I only need the dir, clock and the 12vdc and 0vdc. as soon as I try to hook up the clock pin the motor starts moving erratic. If I to the clock pin to ground the motor does the same thing.448756
how do I hook these up to the Chinese made mach3 breakout board?
the pins from the driver are:
DIR
CLOCK
ON/OFF
MS2
MS1
12-24VDC
thank you!!!
Is there a way to test on the board itself whether the home switches are working. this is on a home built cnc router that I've had for years and just decided to put home switches on it. I just added...
I believe its a wire alignment tool but don't know anything else. Thanks.
Greg
I got my stepperworld board out after a 5 year leave of absence that I had working on a mill now I took it and put on a router and when I power it up I get no locking of any of the motors. I get...
Is there anyway to bypass the communication board or fix the one we have. One day it just stopped working I can't open a path to the host computer. All the usual things were checked,lines plugs, on...
take a look at http://www.5bears.com/gt.htm
Greg
All I can say is start reading books there are alot of calculations to be made, all compressor aren't made the same. When you start changing one thing others have to be changed also. The Kamps book...
I started on a balancer and the electronics to go with it but then I moved and all the stuff is still in storage. Check out the ,pics of my turbine thread, no pics of the electronics but there is...
Thanks for the quick reply!!
Greg
I was wondering how to put 2 drawing files on the same page so I can put them on top of each other to compare them. Thanks.
Greg
Tony,
Basically its a kamps compressor and turbine wheels, shaft and ngv. KJ parts are comb. chamber, fuel ring and outer case. I made dies instead of spinning the parts.
Greg
Thanks Ken, had some time to mess around on the cad thought it would be a nice touch. I've kind of stalled with this project, trying to get the rest of the parts together. Then maybe I could post a...
I looking for work in the southern N.C. I have 7+ years cnc milling experience. I do all the setups, programming and fixturing (If I have extra time), I usually get a print, a router with projected...
I had to make some mods to these for the electronics sensors and yes take a little off the heavy end with a grinder. This is not done yet there are 2 sensors to mount, dc motor with rubber band or...
Here are some pics of my balancing rig I've been working on. Sorry for the bad pics. Late at night, bad kitchen lighting and aluminum reflects nicely.
I was wondering if anyone could help me gather the parts I need to make a balancer circuit for the turbines I build. I have the print where everything goes but I need to know what all the resisters...
The info about the encoders is at http://www.cnczone.com/forums/showthread.php?t=7123
Thanks for your help Lance!!
Greg
I don't know what the amperage on the encoders I got off ebay. How can I check them to see if I need to use a seperate power supply. Thanks!!
Greg
I'm not using a breakout board and I don't think I'm getting a step and dir signal to the drive. I believe I'm not hooking up the common right. Should this come from the computer ps? If so how is...
NICE PICS Vulcom!! One of these days I need to get a cast turbine wheel and need to get going on my plane and finish my wren 54 and try to get my schreckling to self sustain and and and and...
rechecked all the wires, followed the instructions and hooked it up to the other computer and still nothing. The only time I can get the motor to do anything is to mess with the gain and damp and...
there was a 11 sec. video of it running on that thread but the link doesn't work anymore . Must of took it down.
Greg
OOPS let me remove my foot. I was just looking for things to start trouble shooting. I am going to try my computer that I run my stepper controlled mill that uses cncpro, I know that one works, I...
ok so where is all of this great customer service I've read about. I even sent an email to their support on there website and nothing.
Greg
anyone anyone? bueller
Here is what I'm running: Gecko 340 drive with 10x jumper, Lambda jfs 1500-48 ps http://www.lambdapower.com/ftp/Manuals/JFS1500_a.PDF,dell 600mhz optiplex gx1 pc, the cheap clifton servo motor with...
from what I gathered is that this person milling off some extra flash.
Greg
--------------------------------------------------------------------------------
I was wondering if there are any places that integrate these mills with robotic arms for a automated shop. My...