Thank you mike. Yes , if i bypass the tool change the machine will run fine. Of course there are no offsets picked up. But what i did do was give the machine x,, and z locations enough offset that...
Type: Posts; User: spudd
Thank you mike. Yes , if i bypass the tool change the machine will run fine. Of course there are no offsets picked up. But what i did do was give the machine x,, and z locations enough offset that...
Have cincinatti falcon lathe with siemens 2100 control.
The turret will not rotate in automatic mode. I can rotate manually, but when in program. or in mdi as soon as it reads the tool change...
Hey guys thanks for the help.
Found out that the security format for the machine part was corrupted. Had a tech read hardrive and disable security. Then made the changes i needed and turn on the...
Yes. That is what we dont understand. No one has changed anything other than the powersupply..
Need help. I have 1996 cincinatti falcon lathe . The power supply was bad and replaced. When we power it up now, It seems to power up normally. And when we try to change off of the" OPERATOR" ...