Search:

i cant get my 2nd tool (VNMG) to Z0. measure..when i press Z face measure the Z value is -216.767 / -357.065 overrange

i got the tool # 0.000 then i press the Z face measure on my 2nd tool# (VNMG) and im getting an alarm of 316 overange :confused: when i run the program

:) thanks geof

im not familiar with HAAS control i get all tool# in 0.000 when i press origin how do i set one tool on 0.000 :confused:


Val

we use Pyroil Belt Dressing in our sl20 when it screeching

http://www.valvoline.com/pages/products/product_detail.asp?product=32

i think your air compressor is not supplying adequate air ..it happened this in our sl20 when i tool change check your air compressor pressure

thanks for your help guys it works..

http://i38.photobucket.com/albums/e143/asval/sl20.jpg

http://i38.photobucket.com/albums/e143/asval/Img00015.jpg

I need a little help..I want to reduce RPM speed at G70 finishing cycle
my problem is G97S1300 didnt read still 1700 RPM

here' my program (42x120mm 4130 steel)

G54:
G0X200.Z150;
G96S1700;...

mill is more difficult to program than lathe

Agree

go for sl20

if your part pushing..recut the jaw 0.3mm using boring bar or increase the hydraulic pressure to 300psi

sweet!! chip auger

same prob here we have SL20s parts chattering at 1700RPM losing hydraulic pressure

TM-1 Sweet!!

i love hass lathes we have 2 SL20 and planning purchase new 3 HL1..only problems i encountered belt squeakin coolant oil build up at the top ventilation.haas tech visits our shop every 6 months for...

nice ECU jlcortes is it match for my 4 stroke scooter?

try this code

G00 220. Z150. ;
M05 ;
M30 :

I operate 6 CNC lathe and 2 VMC

Haas SL20
2 Takisawa EX108
2 Takisawa TW20
Takisawa TW30
Haas VF2
Haas VF3

new haas vf1 wow

thanks for your help geof and wolog i'll fix this code later.I got this program from other CNC lathe I operate (TAKISAWA EX108 lathe) Fanuc 21 i TB control

Im newbie in CNC programming. firstime to operate and program HAAS machine.I input this program to HAAS SL20 Lathe.the program cycle wont start G-code wrong.what HAAS G-code should i used?

N1 G10...

3yrs mechanic. currently working as cnc machinist now. my future plan to build my own production line of sports cars and jeepneys

I am a full time Chip sweeper and cnc lathe operator.i make parts for motorcycles

put some piece of tin foil or chips under the shim

im 23 first time to operate CNC

im 23