I wanted to close out my experience with these drivers in the hope it may help others down the line as there are so many of these on eBay and Teknic still sells the Hudson motors for pretty short...
Type: Posts; User: jmm2020
I wanted to close out my experience with these drivers in the hope it may help others down the line as there are so many of these on eBay and Teknic still sells the Hudson motors for pretty short...
I was hoping for something a bit simpler but I guess it's a bushing, like say a 1610 and steel pulleys....was hoping for perhaps an aluminum pair but as you say I will probably have to make one as I...
Not sure a great spot to throw this up in but this looked as promising as any other forum.....I am adding a Spindle servo and new spindle....22MM on the servo and 30MM on the spindle and having an...
I did get this all sorted with some assistance from Teknic....The main issue I was having was the thermal cutoff which simply requires 5V located directly across from it on the pinout to be jumped...
One additional item I have come across is in the motor code analysis the "S" in the part number I have indicates a "C" type winding....as I have to do this odd bit of rotation to clear the thermal...
Hopefully a few of you guys familiar with these are out there....amazing to me how truly limited the amount of info there is out there given the shear number of these things out in the field...We...
I have 2 motors on my Y axis and 2 limit switches and curious how to set them up like I had in M3 with 2 inputs. I can tie them together or I could slave the Axis to run on Y and A and then set them...
I also have a complete ESS and MB3 but I believe there is an error with the z axis as it has never signaled properly since I purchased it. I bought it pretty far ahead of a project and when I got...
https://ebay.us/TTFJ9m
Hey Ger...reminds me I need a screen set...our big machines use Quad...its a shorter pulse if I get it all right on the corner of the signal pulse itself...1/4 the wave...also there is CW, CCW A+B+...
I'm all Mach'ed out....I ordered a 300 and a UB1...I am going through the software and in ESS/Mach setup I can select Step/Dir, Quad and AB for servo control...can you do that in UCCNC as I haven't...