Hello all.
Does anyone know hot to manual change tool on a Mahomat 600 with Philips CNC 532 controller? I do not have a tool clamp-unclamp button, so i think it must be done from controller. But so...
Type: Posts; User: BIC
Hello all.
Does anyone know hot to manual change tool on a Mahomat 600 with Philips CNC 532 controller? I do not have a tool clamp-unclamp button, so i think it must be done from controller. But so...
Thank you for you answer Mike.
I have tried to do as you say, but the hydraulics does not stay up.
And i get 2 errors on the machine:
z07 drifting outside no-motion window and
i05 emergency stop...
Hello all.
The company that i am working for has bought a used Mahomat 600 series with philips cnc 532 controller. We had constants problems, but we managed to enter the original constants on the...
Thank You. That did the trick.
Now the machine specks english. All i have to do now is to set all other machine constants.
Do you have a list of constants values that could help me? Or any other...
I have read your instructions correct. But at step 3 you say to change parameter 80 from 0 to 1. I did that but after pressing 1 and process, the control did not reboot, so i could not go to the next...
Thank you for the quick reply.
I have tried to do as you say, but the machine does not restart after changing parameter 80 to 1 at step 3.
Do you have an electronic manual for the machine?
Hello.
We have a maho 532 machine. I have found the parameter 5 for language change and is 1 = english. My question is how to apply the change? Now it is set to 0=german
Do you have an english...
Hello.
Thank you for your posts. The machine is now working. Yesterday they have called a technician to fix the machine and he has fixed it. I was not at work at that time, but from what i heard...
@ Fasto
I cannot move z axis in any direction, even if i removed from location the limit switch.
I get after calibration a " following axis error" , the z position on the screen changes with 0.006...
I have checked and cleaned z axis limit switch. It runs fine, but on current z axis position the z+ limit switch is pressed. so i removed the axis limit switch and tried to manually jog z axis, but...
I have visual checked and cleaned the z axis switch and still no change. Now i think it is an encoder problem. Does anyone know how to check encoder function or how to check/correct encoder settings?
Thank you for your time and advice. I will try and look at the axes limit switches, and then try to see if the encoder settings and functioning is ok. At the same time i have contacted Hurco support...
Hello.
I work in a company that owns some HURCO machines. One is a HURCO VMX 24S. After a "tech" guy came to fix some issues on the machine, we started to have some issues on axis z
So let me...