Search:

Just a quick update.....

I followed the line and it goes to the side tool carousel gear

I'm in the process of purging my lube lines to unclog the lines.

On my manifold inside the cabinet I have (4) Lines

One is the X-Axis
One is the Y
One is the Z

But I'm not sure what this...

I ended up moving the CNC over to my second phase converter so now the air compressor is on the phase converter by itself and that did the trick....

Just a quick update...

Setting 8 ( Prog Memory Lock ) was turned on from the previous owner..

Got that turned off and now everything is working like a charm....

I recently purchased a 2018 Haas DM1 with NG Controller, and I'm new to the NG controller ( My DM-2 has the Pre NG )

So I'm trying to work my way through learning the NG controller, and the first...

Just an update on this.... I talked to my local Haas dealer and they said that when you check the voltage on TB2 Output ( this is the terminals just to the left of the incoming Taps ) that there is a...

I'm running with 2 seperate phase perfect phase converters.

I have my scroll air compressor hooked up to one along with with a Haas super mini mill ( no issues )

On the other phase converter I...

Thanks for your response.... The reason I asked was things have been working so well with my current process and post processor.... and I could envision spending hours and hours cleaning up the...

I have been using fusion 360 cam for my Haas DM-2 for years and just discovered that I never went through the process of setting up that specific machine in the machine configeration section in.

I...

I want to purchase a coolant mist filter system onto my Haas DM-2 and just looking for some recommondations for what has worked for you.

I would prefer a system that doesn't need to exhaust out of...

Thank You very much.... this will get me going in the right direction....

Thanks again,

Kent

Hi Greg,

Just a couple of quick follow up questions.

After re-calibrating everything on the machine, and doing some testing of that haas brand ( maybe the issue? ) 1/2 inch end mill it looks...

Hi Greg,

the only field that I want to clear out is the "probe type" column. All of the rest of the tool offset data will stay put.

I have close to 75 tools in my list, and If I had values set...

I want to import data into the "Probe Type" field which is in the tool offset screen on the haas controller, but I don't know what data field name to use in my G-code.

It's going to be looking...

Just a quick update on this.... I did some playing around, and it looks like if you press the ORIGIN Button while you are on the Probe Type column it will give you the option of clearing that whole...

I want to create G-code that will load a value into the "Probe Type" column. on my Haas DM-2 Mill with classic controller.

The machine is looking for either a 0, 1, 2, 3

Just for reference,...

My 2016 Haas DM-2 has the classic control panel.

Is there a way to clear or set all of the tools to a "0" on the offset probe type ?

What I want to be able to do is use the Probe all tools, but...

Thank You very much for the great Info... It has been some time since I calibrated the tool setter, so that is on tomorrows To-Do list.

I followed your suggestion and removed the figures in the...

In my Cam Software ( Fusion 360 ) I typically use a nominal tool diameter ( example for my 1/2" would be .50 " ) verses the exact measurement of the tool at that point in time.

What I would like...

From time to time I want to do a quick measurement on a work piece to check the width or depth, and I use the slow method of probing the left side of the piece and writing down the that number from...

Thanks Greg,

I checked the owners manual and it looks like the previous owner purchased rigid tapping, but not the Macros and other options you mentioned.

I went ahead and put the Macros /...

Ok, I just found it... ( it was in the common section in the parameters on the second page down the list )

When I turned mine to a "!" it allowed it, but it has a "T" behind it, so I'm assuming...

I have a Haas super mini mill with a pre NGC and I'm trying to figure out if I have the macros option on this machine. ( I purchased this machine used )

I've turned on my emergency lock.

Then...

I am just starting to dip my toe in the water as far as adding my probing code into my programs ( verses manually running my probe when needed )

So I just wanted to post the generic code that I...

You did a GREAT JOB of putting this video together....

I have some 3/8 dia injection mold ejector pins that i need to square off the ends, and I would like to use my CNC to do this, so they are nice and flat on the end verses trying to do it on a bench...

Thank you everyone for your suggestions.

About the time that this popped up I was doing some heavy side milling, so that must have been when it happened.

But to be safe I will take the...

I have a bit of a mystery in the shop this morning... I had my 1/2 inch 4 flute end mill suddenly cutting about .20" to deep on a piece. (It actually cut about .07" down into my soft jaws )

This...

I will have the same issue... this program has 240,988 lines of code in it, and I just checked and the line number "N5000" that was just above the one I'm trying to search for was repeated 35 times...

Thanks for your help...

I had to attach it, verses pasting due to forum restrictions