Search:

Here is the HSD HS610 Double-Sided spindle head in all its splendor:

https://drive.google.com/file/d/11G-3-BrtFmuxRDg7ZCVYAJe6xBbNUE4o/view?usp=sharing

More than a meter long... 290kg of...

Roger,

I am concerned about that as well, but I wonder if there is a way to sync them up. What would be the alternative?

Take a look at this presentation:

https://docs.google.com/presentation/d/1oQa9KjjCxXgXAz2JXqm_BRQWFRgV9l8UEPqjNjdzjTE/edit#slide=id.g405ca24a66_0_8

There, you might notice that we have red...

Upgrading to the larger HS610 double-sided spindle head has introduced an interesting challenge: the head is much wider, and it will be virtually impossible for it to reach a tool without interfering...

Eldon_Joh,

Thank you so much for this advice. It makes a ton of sense, and there is no way that I could have come up with that one on my own. I really appreciate. I'll work on that over the coming...

Each side panel rides on three THK SHS-LV blocks:

https://www.thkstore.com/products/linear-motion/linear-motion-guides/shs-lv-block.html

The top panel uses three THK SVS-LV blocks for each rail:

https://www.thkstore.com/products/linear-motion/linear-motion-guides/shs-lv-block.html

Here is a first design for the roof. It is made of two panels, a small one attached to the front rising panel, and a larger one attached to the top of the outer enclosure. These two panels, combined...

After a long week-end of work, we have a first version of the complete enclosure. It does not have any drivetrain yet, because our priority was to confirm overall geometries and dimensions. But in my...

I usually post on cnczone.com, but the site has been down for a couple of days. Is this a mirror site? If so, I'll post updates to this thread on this site until cnczone.com gets back online.