Search:

Hi I have new problem on my TNC 425 do you have time to help me? My TNC Fall in error. Do you know what mean thease errors? Look pictures in attachement Thank you

I have Hermle milling UWF 600H with Heidenhain TNC 426. Machine powered readdy to work and without tutch anythings on machine, TNC fall in error (Look pictures included) Some body know...

Wanted! I search Tripan Tool post #231, 232 and 244

Can be interrested also #31, 32 and 45

Some Body Have Post processor for pout between Heidenhain TNC 424 and Mastercam :)

Bonjour Je recherche un post pour mastercam Pour une milling Hermele UWF600H
Avec heidenhain TNC 425

Merci

I search one post for TNC 424 heidenhain and Mastercam

Thank You

I search post for milling Hermle UWF600H with heidenhain TNC 425 for mastercam.

Tank You:D

Bonjour Je recherche un post pour mastercam Pour une milling Hermele UWF600H
Avec heidenhain TNC 425

Merci:D

Saint-Hyacinthe Québec Canada
Milling CNC Hermle 600h

I need Machine parameter for TNC 425 Heidenhain

Here my Machine

Hermele UWF600H
Order # 115.00v08
Service ID 1366
Serial # 10300
Control # HS 392
Heidenhain TNC 425

When this Green light suppose to come ON? Look in attachement.
Tank You Yves Giard
122991

With voltage one X31 and X44 pole2 except pole 1. And I unplug all Connection on the PLC except X43 for screen. The Screen suppose to come ON after pout main switch ON??

I made this experience and...

I have 28 volt on pole L+ of K1 Safety contactor emergency stop and the green lower light come on after put the main switch at ON position and my video display don't open automatically (vidéo display...

On TNC 425 I have + 24 volt at connector X 31
I have + 24 volt at connector X 44 pole 2
I don’t have + 24 volt at connector X 44 pole 3

After switching the machine (ON) it is...

TNC 426 is very similar than mine exept hard disk (Under reserve)
Ok good you follow me.

Where is the X34.1?:confused:

Tank You

All the led on power supply of NC are open
I make test point on power supply board of NC
LH 22 and LH24 +5V
LH 20 and LH24 +12V
LH 28 and LH24 +15V
LH 24 and LH24 -15V Here I test 5 volt...

I think of my heidenhain TNC 425 doesn't send signal to visual display Unit and I don't know how test the video board or X43 plug.
Habitually wen I open the power switch on of my milling the video...

I have one milling.
Operating voltage: 380 volt; 3 PH; 50 hz
Total Connect load: 10.5 KW


I have 220 volt 1PH in shop

What sise of rotophase I need Use?:confused:

Tank You Yves Giard

I have one hermle UWF600H with heindenhain TNC 425 with video display (BC 110) I try to install one regular LCD screen with VGA pinout but without succes.

Do you can help me?
Tanks a lot
Yves...