I am trying to remove this boss with plunge rough, with one pass down the middle. I can only get it to where is goes down one edge and back up the other, two passes.
Type: Posts; User: sundewzer
I am trying to remove this boss with plunge rough, with one pass down the middle. I can only get it to where is goes down one edge and back up the other, two passes.
Does any one know how to do this?
Is there anyway to get this down to one pass? The cutter is 1" and even when I shrink the flat width to .3" I get two columns. I just want one path right down the middle. I don't feel this should be...
This is the group of lines I am trying to get rid of. All they do is cut air. I am also using Rest machining from WIP and avoid area.
I didn't see this come through. I will look have a look at it today. I am limited in the y axis with 8". Thanks.
Here is the file. The tie plate is 8" and the max Y travel of my machine is 8.3". I am quite new to solidworks CAM so I could have easily setup something wrong. Thanks for your help.
I tweaked both the air segment and the stepover to get it where it is now. I was able to get the face feature to work but setting the number of passes manually. The issue is the face feature doesnt...
I am trying to rough off a tab and it keep adding in an extra pass or two in the y axis that it doesn't need to remove the stock. When I simulate it all the material is removed on the second y pass...
The TechDB is where most of you default setting. If you already have the operation made you can change it under the optimize tab. I use this similar to a copy(save) and paste(load).
I had this same issue. My plan was to modify the Mach III post but UPG wouldn't open it. I messed around with a few other and just making a change in UPG made them so they wouldn't open again. The...
Everything else is working correct and the probe function is messing up without any wires being use. What type of wiring issue do you think could cause this?
Sorry for the poor description. It all made sense in my head, lol. What I meant to say was when it is malfunctioning the lights don't flash. That is to say I don't think it is getting a false...
The probe works fine when you trip it manually or if the machine desides to move. You can see both the light on the ub1 change and on the diagnostic page.
I made sure when I call the g31 the ...
I just downloaded uccnc a couple weeks ago. I am guessing it is the latest version. Sorry, not near the mill right now.
I was calling it through the single line on the main screen or using the...
When I call g31 for the probe the system will either not move at all or work perfectly. I thought it might be a loose connection or interference but I had it do a long move and tapped on the probe,...
Guess I read the manual wrong. Thanks for your help!
If I put 5VDC on AH1 won't AO1 be AC?
The UCCNC UB1 already have a PWM, can I use that to get 0-5VDC? Is there a way to bypass the AnaSpeed circuit? There is no AC voltage. All I have is the 24VDC and 5VDC from the UB1 and 5VDC from the...
Just what I had sitting on the shelf. As long as you are greasing at regular interval anything with moly in it will be good enough. At Least that is my opinion.
...
One the MV30 I was able to get away with changing to 90 degree zerk fitting. Only thing I had to do was remove some material for clearance for the Y.
https://photos.app.goo.gl/uXqxxMGMHiksJ15F7
...
You are correct on the calculator, I should have spend the extra couple minutes to find for specific for ball screws. I just changed the coefficient of friction 0.01.
Going from a single ball nut...
What I did for an estimate on for the 30MV was take my hardest material to cut, SS 304 for me, and guessed at my the toughest cut. I used https://fswizard.com/www/ to get some rough numbers and if...
I love the enclosure! That is way more industrial than my plans. All you need now is a chip auger ;)
I did and they are sending new bearing. Their customer service is great. It is their quality control that is lacking. I understand not catching the bearing that was missing a ball on the Z, it was...
The clearpath motor are only 4lbs and less than 4" long. I don't think a counter weight is required. If something was needed I would just shift the workpiece closer to the side with the motor on it...
GREAT! Thank again for all the information and helping me pick the motors.
I didn't buy it for the looks either, if I did would have went the a Grizzly. Just can't beat that forest service...
How was the quality on your PM25? I am in the middle of my conversion on the 30MV. The biggest issue was when I moved any of the axis before I tore it down there was a horrible grinding noise from...